Will this programmer do it?

[digidude]

ive dug out my old programmer from the PS1 chip days that i dont think i ever used, ive attached a pic, but its a bit blurred, across the bottom it says

PIC16*84, 12C509, 24LC16 PROG

will this work for the 12F629 chips for the Wii, if so what else do i need?

cheers

dd

 

[digidude]

also is this the correct chip?

PIC 12F629 I/P 8-Pin DIP FLASH-Based 8-Bit CMOS Microcontroller

ta

 

[Conners]

that is the correct chip you need, not sure if that progger can do 12f629's

 

[digidude]

ok i got 10 chips on their way so hopefully itll work for them lol

 

[fes_786]

hi m8 got ur pager

in this thread

http://www.digitalworldz.co.uk/forums/showthread.php?t=117614

attachment call icprog and use the guide in the other attachment

my first post

and that chip is the right 1 i ordered 5 from maplin still waitin on them because they out of stock

lol

 

[digidude]

i got them @ 79p each should have them monday morning

ill look at the spoftware in bit m8, cheers

 

[jimbo19]

I just programmed some 629's with that programmer
It wouldnt do 675's though

 

[digidude]

cheers jimbo19

you couldnt tell me what settings id have to use with the software if possible, i also only have USB ports on the laptop, but do have a comport adaptor that i use for satellite boxes, will this work or will i have to wire it to the main PC?

cheers

 

[jimbo19]

Hi digidude - used the exact settings from this tut wii-xposed.com/tutorials.php?id=3 . I used a direct serial port on my laptop so couldn't tell you if it would work using usb to serial adapter
If I was you I would do it using the main pc with a serial port
: multi :

one slight change I made was to edit the hex before writing and putting in location 3fff the value of the 629 from the read

 

[digidude]

cheers m8, just wait for the chips to arrive tomorrow now, then see if im brave enough to take my toy apart lol, i did with my new PS1 and xbox so i probobly will lol

 

[digidude]

quick question, how long does it take to read the information from the chips?

 

[fes_786]

lol on a 8 leg chip!

my williem takes less than 1 second!

lol

 

[digidude]

ok ta m8, that means its not working properly with my usb-com adaptor, ill wire it up to the main PC after and try again