use this script below
goto winexplorer 5.4
goto configure then clic programme perameters (new box will appear)
set setting to
com port: com1
data baud:115200
reset baud : 115200
parity : none
rec timeout :500
byte delay : 100
reset delay : 100
stop bits : 1
byte convention : direct
flush echo bytes : not ticked
flush recieve buffer before writes : ticked
now in advanced
no resets : not ticked
iso reset (except a atr) : not ticked
device reset(no atr) : ticked
ignore recieve timeouts : not ticked
serial control lines
dtr : low
rts : high
toggle this line for a reset: rts
no clic ok
clic on file at top of page then open script
pick the script you just download then ok
now clic on card then execute script and let it run
NOTE: you need a modded t911 looper and the newd11 flash for the atmel chip
this has worked for me many times on rom10 reva82 and rom11 boc cards
hope this helps
had it runing all night and day with 2 scrips just will not unlock if i start it at packet 2 it will say card unlocked and if i start it at packet 3 it will say card unlocked it just will not go past packet 1 it seems to be stuck on it