what i get on con window

[leedsleeds]

hi i have a sagem dbox2 black 1x i put a image on it and it goes to lade then after that it just stays at a green screem and does nothink i used ifa to flash it but it wont flash so i got a null cable boot the dbox up and in the con window i got

ÿdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID http://Hallenberg.com
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032
debug: Got Block #0036
debug: Got Block #0040


will verify ELF image, start= 0x800000, size= 152952
verify sig: 263
Branching to 0x40000


U-Boot 1.1.2 (TuxBox) (May 23 2004 - 21:44:01)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . | / - \ | / - . \ | / - \ | / - . \ | / . . . - \ | . / - \ | / . - \ | /  done.

find_inode failed for name=tuxbox

load: Failed to find inode

FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
find_inode failed for name=tuxbox

load: Failed to find inode

ready - can't find logo in flash - try network
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5

Retry count exceeded; starting again
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5

Retry count exceeded; starting again
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5

Retry count exceeded; starting again
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5

Retry count exceeded; starting again
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5

Retry count exceeded; starting again
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5

Retry count exceeded; starting again
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5

Retry count exceeded; starting again
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5

Retry count exceeded; starting again
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4

------ Systeminformations ------
Selected networkdevice: 3Com 3C920B-EMB Integrated Fast Ethernet Controller - Packet Scheduler Miniport (0)
IP-address of the networkdevice: 192.168.1.202
IP-address which the dbox gets: 192.168.1.203
Operatingsystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
------ Powered by http://www.dboxservice-hallenberg.de ------ any help can the box be flashed thanks

 

[jd009a9777]

Are you using IFA v2

 

[leedsleeds]

yes

yes m8

 

[jd009a9777]

you could try using the null modem only/hyperterminal method of flashing. I managed to get a sagem box going a again this way. It takes 45 mins to copy the image on though.

 

[mgb]

debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Something blocks the network traffic from the box on the pc.

 

[leedsleeds]

hyperterminal method of flashing

what is that hyperterminal method of flashing can you download the softwere
how do you do it thanks

 

[leedsleeds]

mgb are you saying its fire wall or anti virus

 

[leedsleeds]

might work

hi disabled anti virus got this

ÿdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID http://Hallenberg.com
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.23, My IP 192.168.1.202
debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140336
verify sig: 263
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.1.2 (Tuxbox) (Jun 12 2005 - 13:44:14)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.1.23; our IP address is 192.168.1.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.1.23; our IP address is 192.168.1.202
Filename '/tftpboot/logo-lcd'.
Load address: 0x100000
Loading: *##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.1.23; our IP address is 192.168.1.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.1.23; our IP address is 192.168.1.202
Filename '/tftpboot/logo-fb'.
Load address: 0x100000
Loading: *####################################
done
Bytes transferred = 179877 (2bea5 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0

Bank # 1: INTEL 28F640J3A (64M), 16 bit

Size: 8192 kB in 64 Sectors

Using SCC ETHERNET device
TFTP from server 192.168.1.23; our IP address is 192.168.1.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
####################
done
Bytes transferred = 763552 (ba6a0 hex)
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 763488 Bytes = 745.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Looking up port of RPC 100005/1 on 192.168.1.23

------ Zusatzinformationen ------
Gewählter Netzwerkadapter: 3Com 3C920B-EMB Integrated Fast Ethernet Controller - Packet Scheduler Miniport (0)
IP-Adresse des Netzwerkadapters: 192.168.1.23
IP-Adresse die die dbox bekommt: 192.168.1.202
Comport: Communications Port (COM1)
Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: AMD Athlon(tm) XP 2500+ @ 1833 MHz
Dateiname des Images: Cryo_sportster17_1x_uk04.img
Imagetyp: Ein Flash
DBOX-IFA Version: 2.0
------ Powered by http://www.dboxservice-hallenberg.de ------

 

[leedsleeds]

dbox

and on my dbox it says up the top dbox2-ifa in the midle lade software...
at the bottom hallemberg.com

 

[jd009a9777]

Sounds like its flashing sucessfully, leave it until it finished it should say fertig and a few smileys on the lcd the restart job sdone

 

[jd009a9777]

it could be firewall software as well thats blocking

 

[jd009a9777]

do a search for null modem and serial cable in the main forum there is a tutorial on flashing with null modem cable only although it looks like you don't need to use that method

 

[leedsleeds]

dbox

how long should i leve the dbox on the ifa screem where it comes up with lade
do i have to set up ifa

 

[mgb]

@leedsleeds
The flashing procedure never starts.
Use the english IFA or the newest 2.0 version.

 

[leedsleeds]

it works yes

it now works it has flashed it was the stupid norton anti virus using a null cable is it faster doing that then just using the earthnet because it used to take 15 mins this 1 toke 5 mins any way thanks for your help now i just need to get a image that is good for front row epg and good for recording any idea thank for all those that helped me thanks....