what equipment do i need to get
- Thread starter i-zombie
- Start date
TheDogsNutts
Member +
an unlooper for ya cards
for ya 2000 a re-work station, and a programmer that can do the atmels.......
for ya 2000 a re-work station, and a programmer that can do the atmels.......
so is an unlooper the same as a glitcher,what type ov programmer for atmels-rework station sounds expensive-and i read that a hot air gun was needed for atmel removal -aint it possoble to to do the volt meter method on the 2000-its easy enough on the 1000
damn i just keep coming with the questions dont i-i did search b4 anyone says search-but the info tend to conflict
damn i just keep coming with the questions dont i-i did search b4 anyone says search-but the info tend to conflict
TheDogsNutts
Member +
the hot air gun m8 is the re-work station
to program the atmelsi have got a up-48 high speed programmer, does the chip's in less than 15 second's
and an unlooper is the same as glitcher, your best bet is buy 1000 boxes
and get the boxkey out of the database,
thats the cheapest way............
to program the atmelsi have got a up-48 high speed programmer, does the chip's in less than 15 second's
and an unlooper is the same as glitcher, your best bet is buy 1000 boxes
and get the boxkey out of the database,
thats the cheapest way............
violentj said:
No m8... you can't , the sammy box is a lot harder to do than a 1000 box.
unlooper the same as a glitcher = yes you need a T911 to unlock your cards.
Follow the info you get off @The-Dogs-Nutts @JIMMYQ and you cannot go wrong!!!
Cheers Garry
ive tried bout 6 1000 irds in the database and only found 1 bk besides id just like to be able to know i can do em
could u tell me if this is the gear im after
www.tailor-madecircuits.com/t911_unlooper.htm
www.tailor-madecircuits.com/mcesdk_adapters-tsop 48.htm
shop.jabsplace.co.uk/index.php?main_page=product_info&cPath=5&products_id=36
and in regard to the rework station couldnt i just desolder
could u tell me if this is the gear im after
www.tailor-madecircuits.com/t911_unlooper.htm
www.tailor-madecircuits.com/mcesdk_adapters-tsop 48.htm
shop.jabsplace.co.uk/index.php?main_page=product_info&cPath=5&products_id=36
and in regard to the rework station couldnt i just desolder
ok here goes we have
ROM Revision: 011
EEPROM Revision: RevB0C
ROM Revision: 010
EEPROM Revision: RevA3C
ROM Revision: 010
EEPROM Revision: RevA3C
ROM Revision: 010
EEPROM Revision: RevA82
ROM Revision: 011
EEPROM Revision: RevB0C
ROM Revision: 010
EEPROM Revision: RevA82
ROM Revision: 011
EEPROM Revision: RevB0C
ROM Revision: 010
EEPROM Revision: RevA3C
ROM Revision: 010
EEPROM Revision: RevA3C
ROM Revision: 010
EEPROM Revision: RevA82
ROM Revision: 011
EEPROM Revision: RevB0C
ROM Revision: 010
EEPROM Revision: RevA82
yeah ive tried get this
Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 33 43 3A
ROM Revision: 010
EEPROM Revision: RevA3C
ProviderID: 5C
CamID: 27 6D 84 4E
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
Error, BackDoor reported disable - Card may contain update
Reading ROM10 failed
Closing of COM1 was successful
is a t911 all i need to glitch em
Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 33 43 3A
ROM Revision: 010
EEPROM Revision: RevA3C
ProviderID: 5C
CamID: 27 6D 84 4E
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
Error, BackDoor reported disable - Card may contain update
Reading ROM10 failed
Closing of COM1 was successful
is a t911 all i need to glitch em
busted is in the downloads and it works on a3c - I've used it successfully before. You should be ok with a 2000 so long as it has the original card - as it's an exC&W box you'd be pretty unlucky if you can't get the bk off the card; pure ntl and telewest will often write a fake bk when their boxes go off sub but exC&W don't seem to.
Similar threads
