what do i need to read an ntl card

[i-zombie]

hello everyone-was just wondering if anybody here could tell me what soft/hardware i need to read an ntl card any info would b apppreciated

 

[logic_187]

to read a unlocked MOSC card all you need is a phoenix capable programmer and nagraedit.

Depending on how its locked (what revision) then you will need a glitcher/unlooper, winexplorer and scripts which are associated with glitching or XNCS, CATON, BUSTED, VIAGRA etc.

How will you know if its locked, i hear you ask.....if you try to read the card from Nagraedit and it doenst let you in then its most likely locked.

 

[L33tpL4y4]

to read a unlocked MOSC card all you need is a phoenix capable programmer and nagraedit.
Depending on how its locked (what revision) then you will need a glitcher/unlooper, winexplorer and scripts which are associated with glitching or XNCS, CATON, BUSTED, VIAGRA etc.
How will you know if its locked, i hear you ask.....if you try to read the card from Nagraedit and it doenst let you in then its most likely locked.

what are the setting when trying to read it? what mode and votage, i have a usb phonx, im from the modem sec. cheers

 

[logic_187]

@L33tpL4y4
your programmer needs to be 3.68mhz and in phoenix mode as you will be using 3rd party software.

 

[L33tpL4y4]

@L33tpL4y4
your programmer needs to be 3.68mhz and in phoenix mode as you will be using 3rd party software.

Ok thanks m8, i have 3 of these cards and would like to know if their locked. Cheers m8

 

[logic_187]

if you have 3 of these original NTHELL cards, put your programer in phoenix mode, fire up nagra edit and see if you can read the card from within there, if you cant then chances are it is locked. When you read the card you will be given some information including a revision nunmber. Now depending on what revision you have you could either use your current hardware and some additional software to unlock it or you may need to purchase additional hardware such as a glitcher/unlooper. If it is unlocked it will give you a message something along theline of this:

Attempting to login to BD3
Attempting to login to BD0
BackDoor login verified
Dumping CodeSpace
Reading ROM10 successful
Card read successfully
Efficiency: 99.3%, Packets: 141, Retries: 1, Time: 21.28s
Closing of COM1 was successful