VM update, No channels

jammoboss

Inactive User
Joined
Jan 7, 2007
Messages
966
Reaction score
17
hi guys i didnt know weither to post this here or the funcard section so i did both.

I got two boxes 4001n and a 4010 my 4001n is working great using a funcard 4, im in ntl pure area and its using the old ntl software, i get the movie channels by entering the pin.

The problem is the pace 4010, it was updated a few days ago, since then there are only bbc1/2 etc, i tried reprogramming the card using crypt hex v3 that never worked so i found a virgin fix flash file in the download section, that still never worked, so i was told to reset the box so i removed the red jumper and battery (as i was instructed to do) reboot it and went into the enginers menu.

My Mac address was set as is my net id (00004), the card status was "please wait" for about a min then it was OK. Plus i could set the pin number again :)

After trying the card again NO LUCK


Can anyone help?
 
hi guys i didnt know weither to post this here or the funcard section so i did both.

I got two boxes 4001n and a 4010 my 4001n is working great using a funcard 4, im in ntl pure area and its using the old ntl software, i get the movie channels by entering the pin.

The problem is the pace 4010, it was updated a few days ago, since then there are only bbc1/2 etc, i tried reprogramming the card using crypt hex v3 that never worked so i found a virgin fix flash file in the download section, that still never worked, so i was told to reset the box so i removed the red jumper and battery (as i was instructed to do) reboot it and went into the enginers menu.

My Mac address was set as is my net id (00004), the card status was "please wait" for about a min then it was OK. Plus i could set the pin number again :)

After trying the card again NO LUCK


Can anyone help?
have a check of your frequency and make sure you used the right v3 m8
 
for my area the freq should be

755.000, so where do i find if this is right? eng menu?
 
ah it was set to 685000 i have changed it now and going to try the card again using the vm fix flash file.


Nope didnt work, still stuck :(
 
hi all still no luck

anyone here with a pace 4010 pure ntl area working?

ive tried crypthex v3, virgin flash.

Crypthex eep and 16-03-2007 int eep

and ive tried inputting virgin tiers into my ext eep .bin file?

what else is there to do? what am i doing wrong, can anyone HELP PLEASE
 
hi i sorted it out yesterday i used cryp v3, int eep was crypt eep

and my external file needed to be edited and update the tiers :)

after rebooting it worked, still no movies mind all i get is please wait and a blue circle to ccancel.
 
Back
Top