Vcds-lite for younger cars 2008———>>

Thank you. Found it on another forum I'm a v.i.p. member in. But this useful too. Thanks for your time. But I'm still having problems.


I can install the firmware hw 46 to the lead fine.

When I open 18.9.0 with loader v7.2 it asks me to update to 1.96.

When I do and I test the hex v2 IT BRICKS THE CABLE and vcds says "interface not found" then I have to re load the firmware back onto the lead.

But it works perfectly on an earlier version.

Tell me if I'm doing something wrong. People have said it works. It hasn't for me yet.
 
Thank you. Found it on another forum I'm a v.i.p. member in. But this useful too. Thanks for your time. But I'm still having problems.





When I open 18.9.0 with loader v7.2 it asks me to update to 1.96.

At the point you allow it to do the update that is normal.

Reboot and run the loader from the same folder as VCDS is installed to dont forget to delete the desktop link from the standard VCDS install.

If this does not work 1.8.9 is the second issue you need the first which is no longer available via the ross tech site.
 
Uploaded is the earlier version of 1.8.9

Use this after flashing cable again.
 

Attachments

  • VCDS-Release-18.9.0-Installer Use this early version.rar
    43 MB · Views: 1
Back
Top