unlocked rom 010 reva61

i-zombie

VIP Member
VIP Member
Joined
Oct 22, 2005
Messages
3,749
Reaction score
90
Location
leeds
hi guys could some one tell me what i need to use this card is unlocked but im at a loss as to wether i can do owt with it
ive wiped the card-loaded my area rom10 bin image onto it with my box details booted in eng menu and get null id in card status
 
or could sum 1 point me in the right direction for a tut or guide or summat please
 
violentj said:
or could sum 1 point me in the right direction for a tut or guide or summat please

Try opening the card with Nagraedit and post a copy of the message screen you get?
 
ok i getOpening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 30 30 4A
ROM Revision: 010
EEPROM Revision: RevA00
ProviderID: 5C
CamID: 00 00 00 00
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Backdoor retrieval has been blocked
Attempting to login to BD3
Attempting to login to BD0
Unable to login, bad password detected
Login attempt aborted
Reading ROM10 failed
Closing of COM1 was successful


this with nagraedit yet xncs lets me read and rite it
 
Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 36 31 4D
ROM Revision: 010
EEPROM Revision: RevA61
ProviderID: 5C
CamID: 00 00 00 00
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Backdoor retrieval has been blocked
Attempting to login to BD3
Attempting to login to BD0
Unable to login, bad password detected
Login attempt aborted
Reading ROM10 failed
Closing of COM1 was successful

and this on my other card
 
If you can read the card with XNCS then take a look at the "eeprom" tab and note down the BDO which is located at line C040 (32 digits).

You can then use rom studio to write a blank image (a good one that opens with nagra). When you are about to write the image, rom studio will ask you for the BD0 password. This will be the 32 digits that you will have seen in XNCS at line C040.

Hopefully once the blank image is on the card it will then be able to be dumped and written to using nagra 3 or 4.1.
 
i now get this msg

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 36 31 4D
ROM Revision: 010
EEPROM Revision: RevA61
ProviderID: 5C
CamID: 11 11 11 11
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Attempting to restore BackDoor 0 key
Attempting to login to BD3
Attempting to login to BD0
BackDoor login verified
Dumping CodeSpace
Reading ROM10 successful
Card read successfully
Efficiency: 99.3%, Packets: 142, Retries: 1, Time: 19.26s
Closing of COM1 was successful

ive entered my bk and ird now what
 
its ok i stuck it in my box and wayhey i have channels-so is this card now an auto update one and is there owt i shouldnt do
 
violentj said:
i now get this msg

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 36 31 4D
ROM Revision: 010
EEPROM Revision: RevA61
ProviderID: 5C
CamID: 11 11 11 11
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Attempting to restore BackDoor 0 key
Attempting to login to BD3
Attempting to login to BD0
BackDoor login verified
Dumping CodeSpace
Reading ROM10 successful
Card read successfully
Efficiency: 99.3%, Packets: 142, Retries: 1, Time: 19.26s
Closing of COM1 was successful

ive entered my bk and ird now what

whys the rev a61,thought these went a16,any1 ???????
 
UNDETTERRED said:
whys the rev a61,thought these went a16,any1 ???????
the poster has not written the card with nagra - most likely only wrote the dataspace with xncs1.8 - sadly the card may well rev up to a81 in a short time!
advice - if the card hasn't already gone up then open it in nagra - reload the au image and edit in your bk and ird then write the card with nagraedit. the rev should then change.
 
Back
Top