Losing internet connecting can be caused by losing Mac. address which might be after effect of multiple installation of different images.
please Press Lan button on your remote/adaptor setting/see if ip address is missing/Exit to menu/setup/information/about /2nd line down you can see mac. address /if all Zeroes
Follow below
==============================================
Even instruction followed in some circumstances it will not write.
By following below instruction job done each time by 100%
Ignore TM-Nnao writing on the Loader it is for all 7355 models
1- Look at the back of your Receiver you will see Mac, Address
Write mac. address of any 7355 receiver on a sheet of paper >>I.e.>TM-twin/2t/nano/nano2t/single.
2-Read from Wright to left 12 digits Example. 1112 0cc6ac009c3f Use all7335 models Loader
3-connect RS232 to pc and receiver/Write mac, address in multiple of 2 in each box
Press start
4-Turn on the receiver and immediately press ALT/C several times on your pc keyboard until you see CFE on the bottom of your screen /job is done
5-ALT/F4 will turn off the Loader off desktop screen.
To prevent Mac. Address loss.
Please follow below instruction.
After fixing Mac. Address please unzip attached boatload use usb, insert to the front or rear usb, off/on
from rear follow on screen instruction. After downloading this boatload it will not happen again.
if you are upgrading to any other images , after image download down load this boatload to prevent from happening again
Attached Files: