TomTom v7 on Navigo

bigup asked quote:


whats the latest version 7 tomtom can you use on the navigo?

I purchased the Navigo V.3 yesterday from Ebuyer.
Using the Muppet key I successfully installed TomTom version 7.910.
It all seems ok, everything seems to be working, the only problem is I can't figure out how to install and activate the speed cameras. No matter where I put the premium speed camera files the Navigo doesn't work with them. Can someone help me with installing speed camera's please?

Put them in the maps folder. See this
 
Last edited by a moderator:
Thanks pks00, all sorted now, speed cams working a treat.

Used the latest Muppet key and that clinched it.

Any clues on where to obtain this muppet key and updates please ? ;-)

I drove round walsall the other day and my maps were so out of date its unbeliveable and I only updated it about 2 months ago :(
 
hey i have the naigo v3 just bought it of ebuyer. ive been trying to find the tomtom7 software all over the internet and cannot find them anywhere i found this website and have found some links but they are broken could anyone please get me a new link to download the tomtom 7 software it would be much apreciated thanks kent
 
Hi kentiboii and Lanstrom,

If you go here ***.thepctailor.com
You will have to register, but you can download all you need. Be prepared to do a bit of reading to find out how to do it.

Since they built the ring road around Walsall I get lost all the time. Haven't tried the new Navigo there yet.
 
Last edited:
Hi all,

have also tried to do this and had no success, i dont get the meta file when i input my unique ID

can anyone help please?

Many Thanks

Dave
 
Hi all,

have also tried to do this and had no success, i dont get the meta file when i input my unique ID

can anyone help please?

Many Thanks

Dave


Looks like your trying to activate your map the 'old' way. Trust me mate, get a hold of the 'Muppet Proof Keygen' & it will activate all the maps on your memory card. Google is your friend.
HH.
 
Hi,

I followed a link but it requires that i log in? is there another way i can get the 'muppet proof keygen'?

Thanks
 
Is anybody able to produce the META file for me?

my ID is : AACA49SAUE

Hope someone can help.

Many thanks
Dave
 
Don't think it's possible to produce the meta without knowing which map it's for. If it is I don't know how.
You really need to activate the map for yourself mate.
HH

Oh & I googled 'muppet proof keygen download' just there & was able to download the necessary file, without logging in, from the 1st page of results. The forum thread I got it from has a great guide on how to use it too.
Good luck.
 
Look mate there's probably dozens of uk and ireland maps. Each map has a 7 figure number after it, diff number means different map.
I've advised you how to do it for yourself in my last post. You probably think I'm being a knob not activating your map for you but you really need to figure out how to do it yourself. Most folk struggle the first time till they get their head round it but the Muppet keygen is easily the best way to activate.
Again good luck (& good night)
HH.
 
Hi everyone!
I Have been through all the posts and clicked on all the links but they all seem dead. I'd like to get TT6 running on my Navigo V1. Don't need anything fancy, but, although pretty handy with a PC this is making me feel like a complete noob!!! Is there any kind person able to post a link to the software I need? I should be able to follow the original instructions OK and have all the gear I need.
Thanks in advance

J
 
I would be grateful if someone can help with me installing TT7 on my Navigo!!

I have followed the initial instruction to the letter and two things happen,
1. I already have a meta file present before I edit/apply my device key
2. When I try to open the file I get a quick flash of the DOS window and thats it.

When I put the SD back into the Navigo it starts TT gives me the Map Option but then just loops when I press continue or says iexplore.exe not found if I press the voucher key.

I have down loaded keygen and tried that but that won't work either!!

A few things of note. The device ID has had three formats so far in this thread, either all 10 digits, 5 digits - 5 digits, or 5 digits . 5 digits. Which is it??

If you know what your doing in DOS that might be all well and good but I don't and would appreciate some detailed and correct instructions.

To put this into context I fly a Boeing 747 for a living and if you wanted to know how to take it off the runway I could say just pull back on the stick! You wouldn't get very far the same as I haven't here!!! Now spent 12 hrs on this and I haven't got much hair or patience left please help!!
 
hi i am having problems getting this to run cannot generate a meta.dct file thus cannot activate the maps any help is most welcome:Clap:
 
Hi guys
I have navigo V2, I think, looking at the photos of navigo satnavs, although when I raed about it it says V5.1.4.
I have read all the posting int his thread afew times but don't seem to be able to get passed teh first hurdle. To download maps and relevant software.

I have tried all the links. they are either dead or want to be filling a form, which I did afew times but it never allowed me to download the file. I even regsited at ###talior.com, but then it wants me to be sponser.lol

can some one please get me going with a link for dowloading the sufft for putting tom tom sofateare on this out of date navigo.
Cheers:proud:
 
I've had one of these Navigo v1 for a while and got my head round it years ago. I've only had UK maps on it but now I need to use it in Majorca could anybody point me in the right direction to get the Spain maps on it. Working off a new laptop now and can't use activesync cos it's Windows7. Do I have to reprogramme the unit to get new version of Tom Tom to work or can I just add new maps to my existing set up.
 
I've had one of these Navigo v1 for a while and got my head round it years ago. I've only had UK maps on it but now I need to use it in Majorca could anybody point me in the right direction to get the Spain maps on it. Working off a new laptop now and can't use activesync cos it's Windows7. Do I have to reprogramme the unit to get new version of Tom Tom to work or can I just add new maps to my existing set up.

Find a Majorca (Spain) map that is compatible with your version of TT. Hope it fits on your SD card, add it on & use something like Fast Activate to get it working. Then all you need to do is Switch Map when you're in Majorca & switch back when back in UK.
Thinking about it maybe a Western Europe map will cover Majorca & UK, that might be a better option for you.
Good luck,
HH.

FYI, I've got Tom Tom version 7.910 & Western_Europe_1GB_v830.2306 is compatible with it & ideal for your requirements.
 
Last edited:
Back
Top