DS-CVS4.0 for Memory card
Unpack the files into your fat formated memory card.
Procedure:
Switch OFF the TM9100 receiver, and insert the SD card.
Switch ON the TM9100 receiver and the Files will load.
When complete the Receiver will report "Done" on its display.
Switch OFF the TM9100 receiver, and remove the SD card.
Carry out a Factory Reset as follows:
Switch ON the Mains power to the TM9100 whilst pressing the UP buton on the Front Panel.
Using the UP or DOWN button, select on the TV screen "Factory Reset".
Start the Factory Reset by pressing the RIGHT button.
When the Factory Reset is complete, proceed with the basic setup as normal.
If you have a spare SD card it is advisable install a Swap-file on it.
9100 = 9100
9101 = Super
Unpack the files into your fat formated memory card.
Procedure:
Switch OFF the TM9100 receiver, and insert the SD card.
Switch ON the TM9100 receiver and the Files will load.
When complete the Receiver will report "Done" on its display.
Switch OFF the TM9100 receiver, and remove the SD card.
Carry out a Factory Reset as follows:
Switch ON the Mains power to the TM9100 whilst pressing the UP buton on the Front Panel.
Using the UP or DOWN button, select on the TV screen "Factory Reset".
Start the Factory Reset by pressing the RIGHT button.
When the Factory Reset is complete, proceed with the basic setup as normal.
If you have a spare SD card it is advisable install a Swap-file on it.
9100 = 9100
9101 = Super
