Script or glitcher problem?

Donnie Darko

Inactive User
Joined
Jul 6, 2005
Messages
5,361
Reaction score
45
Location
In the bookies
Using mrmp 1.4 i started a rom 11 glitching last night,came back to an hour later and find it had stopped with the error message'too many consecutive resets'.
Ok so i try another script and get 'non valid provider message' FC01?wtf.

I then go to nagra and card is saying now 'invalid atr' so the cards goosed and i go to bed.
In work at the mo,anyone got any suggestions as to why this has happened?
 

dannyrp03

Inactive User
Joined
Dec 6, 2004
Messages
383
Reaction score
1
try using mrom(set delays to 80,20,80) to fix the no atr problem once youve done that try using different script plenty around for rom 11 hope this helps danny
 

carwash

Member ++
Joined
Mar 20, 2005
Messages
959
Reaction score
7
That card has had it m8"!
When you get FC01 Provider it usualy means that the Dataspace pointer is Corrupted"! so card (Cam) will fail
 

Donnie Darko

Inactive User
Joined
Jul 6, 2005
Messages
5,361
Reaction score
45
Location
In the bookies
carwash said:
That card has had it m8"!
When you get FC01 Provider it usualy means that the Dataspace pointer is Corrupted"! so card (Cam) will fail


Thanks for replys,CW any idea whats caused this?is it just that the glitching process has killed it?
 

carwash

Member ++
Joined
Mar 20, 2005
Messages
959
Reaction score
7
UNDETTERRED said:
Thanks for replys,CW any idea whats caused this?is it just that the glitching process has killed it?

You are right when you say that the glitching process has killed it when writing to card

With NagraEdit not currently support reading or writing of cards with data space's starting at different addresses or cards that have a corrupted data space or data space pointers, I can't see a fix at the moment, but i'm sure somebody somewhere is already working in a script to re-write or correct the Provider info in the card
 

Donnie Darko

Inactive User
Joined
Jul 6, 2005
Messages
5,361
Reaction score
45
Location
In the bookies
carwash said:
You are right when you say that the glitching process has killed it when writing to card

With NagraEdit not currently support reading or writing of cards with data space's starting at different addresses or cards that have a corrupted data space or data space pointers, I can't see a fix at the moment, but i'm sure somebody somewhere is already working in a script to re-write or correct the Provider info in the card


Yep just tried card in nagra again,i now get this message....

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 00 00 00 00 00 00 4B
ROM Revision: 011
EEPROM Revision: ......
Dataspace pointer is bad - cannot continue
GetCamProvider failed
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Reading ROM11 failed
Closing of COM1 was successful

I take it theres no anti-dote?
 

carwash

Member ++
Joined
Mar 20, 2005
Messages
959
Reaction score
7
Not”!!at the moment m8”
 
TEST
Top