sammy

[steve9218]

Hiya peeps,

I really need some help, im struggling setting the nt id i've tried the jtag, but i don't exactly know what im doing, used the mac file for the net id, but it just stays at 09999!

I've tried the funcard way, but im stuck on understanding this bit....
2. PROGRAM YOU CARD. YOU CAN USE ANY FUNCARD FOR THIS AS LONG AS IT HAS
AT LEAST A 24(L)C64 OR GREATER EXTERNAL EEPROM.

THE FLASH FILE GOES IN THE FLASH

THE INTERNAL EEPROM (THE FILE YOU CREATED ABOVE) GOES IN THE INTERNAL
EEPROM.

THE EXTERNAL EEPROM IS A NAGRAEDIT IMAGE. THIS MUST CONTAIN THE CORRECT
BOXKEY AND TIER01 MUST BE THE FIRST TIER ON THE CARD.

This i don't understand!

Your help is much required and appreciated!
:angelwing

 

[bammy]

I tried and failed to set the netid on a sammy using the funcard method, so just reverted back to using a jtag. Use SDT software to calculate the hex code required for your netid, then use OCD commander to input the bytes. Reboot the box and 'dump keys' in SDT to make sure the netid is set correctly.

 

[draindet]

I have done the same sammy twice using the funcard method just to see if i could, never had a problem apart from when the box reboots it sticks od LD20, just reboot and your net id will be ok, dont forget to short the battery first the funcard method only works if the net id is 09999