sammy bytes for ocd
- Thread starter mascot18
- Start date
ramraider
Inactive User
- Joined
- Jun 1, 2005
- Messages
- 1,796
- Reaction score
- 14
try these mate
BYTES FOR BK AND IRD WITH OCD
OCD commander, and the following bytes
byte 0x20020004 4 = IRD
byte 0x00A0E6DC 8 = Box Key.
Byte 0x00a0e6dc 8 12FF = Boxkey on new sammy s/ware
Byte 20020004 4 12FF = Ird on new sammy s/ware.
New bytes
BYTE 0X00942D24 8
BYTE 0x00F6A8A8 8
Byte 0x00a0e6dc 8 12FF
Byte 20020004 4 12FF
byte 0x20020004 4
byte 0x00A0E6DC 8
Ntl bytes
Really hope this helps...............
This is the latest byte info for new sammys in some pure NTHell area's:
0x00F6A8A8 - Change config 1. file in BKE 2.2 or
BYTE 0x00F6A8A8 8 - type this into OCD for your BK
Box key =
Byte 0x00a0e6dc 8 Boxkey
BYTE 0x00F6A8A8 FF
BYTES FOR BK AND IRD WITH OCD
OCD commander, and the following bytes
byte 0x20020004 4 = IRD
byte 0x00A0E6DC 8 = Box Key.
Byte 0x00a0e6dc 8 12FF = Boxkey on new sammy s/ware
Byte 20020004 4 12FF = Ird on new sammy s/ware.
New bytes
BYTE 0X00942D24 8
BYTE 0x00F6A8A8 8
Byte 0x00a0e6dc 8 12FF
Byte 20020004 4 12FF
byte 0x20020004 4
byte 0x00A0E6DC 8
Ntl bytes
Really hope this helps...............
This is the latest byte info for new sammys in some pure NTHell area's:
0x00F6A8A8 - Change config 1. file in BKE 2.2 or
BYTE 0x00F6A8A8 8 - type this into OCD for your BK
Box key =
Byte 0x00a0e6dc 8 Boxkey
BYTE 0x00F6A8A8 FF
doodster99
Inactive User
i had the same problem this is what i did & it works everytime: solder the jtag to the box connect to the pc then power up the box wait till ld 20 comes up then press ch- button & hold it till the display goes blank then let go wait about 20 to 30 seconds till 0 appears on the display then open ocd & type: byte 0xf6a8a8 ff then enter key and all should be well good luck m8.
doodster99
Inactive User
no probs m8 glad i could help you out.
stevensan36
Inactive User
- Joined
- Jul 18, 2005
- Messages
- 112
- Reaction score
- 0
box key problem sorted now
hi doodster just say you are a top man i have messed with sammy for three days tried every byte ect and then i read you r thread the thing i was not doing right was after pressing down button on ld20 and goes to ld40 then blank i was not waiting for the o to come up it is not made clear in any place i have read in this forum and others soon as waited for 0 up it came in ocd and bkev2.2 after editing confi.1 line with your byte so again thankyou very much m8 your a star :Cheers:
hi doodster just say you are a top man i have messed with sammy for three days tried every byte ect and then i read you r thread the thing i was not doing right was after pressing down button on ld20 and goes to ld40 then blank i was not waiting for the o to come up it is not made clear in any place i have read in this forum and others soon as waited for 0 up it came in ocd and bkev2.2 after editing confi.1 line with your byte so again thankyou very much m8 your a star :Cheers:
