sagem dbox loading kernel

marine

Inactive User
Joined
Feb 8, 2006
Messages
18
Reaction score
1
Hi
I have just tried to flash a new image onto my friends sagem dbox2. Everything seemed to be going fine, up to where it is doing the final flash, then it just stopped working. Eventually I switched off the machine and now when I reboot the box it just shows a message "loading kernel" Anyone got any ideas. I am new to all this
 

seanicca

VIP Member
VIP Member
Joined
Dec 6, 2005
Messages
2,257
Reaction score
254
Location
Anywhere
try IFA and reflash it if you can, should find all you need in downloads you also need null modem and xover cables
 

rodboy

VIP Member
VIP Member
Joined
Jan 28, 2007
Messages
1,530
Reaction score
186
Location
falkirk
You can flash with IFA using crossover cable only, read the recent threads in the dbox section. Also make sure you get the correct image type for your box, Sagems can have either 1 or 2 flash chips, so make sure your image is 1x or 2x accordingly.
 

marine

Inactive User
Joined
Feb 8, 2006
Messages
18
Reaction score
1
Hi
Thanks for the info from you both. I will try reflashing. I know it is a 2 chip box. many thanks
 
TEST
Top