Reading a working titanium 2

eyesplash

Inactive User
Joined
Mar 30, 2005
Messages
26
Reaction score
0
Is it possible to take an image of a tit2 card that still works and save it 2 another tit2 card?? a friend of mine tells me his card still works so im hoping to take an image and test it out on my tit2. if it's possible then i'll do it and post the image here.
 

rock

Inactive User
Joined
Mar 21, 2005
Messages
886
Reaction score
3
Dumping a TIT2 Image:

I use Dynamite programmer.
Run programmer in pheonix Mode 3.68 Mhz
open winexplorer Im using 5.42
make sure its set to TitaniumCard_Nagra_settings (Configure,Program Parameters)
Click File, open Script. load saveeep.xvb
Run Script (icon is finger touching paper)
Then should ask you for your to save image type name of file then .bn10 at the end.
 

eyesplash

Inactive User
Joined
Mar 30, 2005
Messages
26
Reaction score
0
and that would definitely work wen i write the image to my tit2 so it'll start au'in again??
 

rock

Inactive User
Joined
Mar 21, 2005
Messages
886
Reaction score
3
eyesplash said:
and that would definitely work wen i write the image to my tit2 so it'll start au'in again??

You will have to dump the image and then open it in Nagra and change the IRD and Box Key and then load the image back to your card.

What area are you in?
 

eyesplash

Inactive User
Joined
Mar 30, 2005
Messages
26
Reaction score
0
im in a tw area. if i get this workin i'll post it on here. wat'll i need 2 do 2 make it work wid nt* area too??
 
TEST
Top