Pleeaze Help Di4001 Box Dead!!

freshness

Inactive User
Joined
Jul 20, 2005
Messages
63
Reaction score
0
Hi ive got a di4001nc pace box and something wrong with it. Ive progd a fun4 stuck it in and it just gets a fuzzy screen. I can see the channel is there and working but the screen very fuzzy like bad reception. I read somewhere to remove the red jumper.

Did this and connected up today and all i get now is the pace sign and it just sits on tune.
The only other thing might need to say is last night i opened the box to check if TB was disabled. did that using this pik (is this the right one?)

http://www.world-of-digital.com/forums/attachment.php?attachmentid=5996&d=1121789619

any help appreciated guys. :Cheers:
 

cashmere

Inactive User
Joined
Nov 16, 2004
Messages
237
Reaction score
1
Location
[you]
is it fuzzy through scart..or rf
if its rf then u need to fit a bypass
 

freshness

Inactive User
Joined
Jul 20, 2005
Messages
63
Reaction score
0
than x for the quick reply cashmere.

its a scart lead. But good news the fuzzyness has gone and all the free channels are back on so its a start.

Ther only thing now is all the channels are in grey (like black and white) ive tried changing all the scarts and tkaing out cabkles etc but no luck?
 

cashmere

Inactive User
Joined
Nov 16, 2004
Messages
237
Reaction score
1
Location
[you]
strange one.....usually a bypass will fix the fuzzy picture in rf mode...cant help u with scart though
 
TEST
Top