• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

pace done sammys next

Joined
Mar 20, 2005
Messages
790
Likes
3
#1
ok i think i have mastered the pace boxes its now sammys i got a load of good advice of this great forum on pace boxes im hoping for the same with sammys i need the best jtag and connecting pins talkback on sammys boards etc can anybody give me a tut on where on the board you connect jtag etc thanks for everything
 

dave_c

VIP Member
VIP Member
Joined
Aug 18, 2005
Messages
2,510
Likes
43
#2
dpending on wat sammy it is , u can tag the 2100 , but not the 2110 , tmc do some jtags , u will need a 20 pin one if goin for pogo type or a universal one if soldering

see pic for jtag points on 2100 , other pic is talkback on 2100
 
Last edited:
Joined
Mar 20, 2005
Messages
790
Likes
3
#3
thats a lot of wires did you say there is a un solderless jtag available and on the talkback do you cut inbetween the arrows
 

afcwomble

New Member
Joined
Oct 8, 2005
Messages
0
Likes
6
#5
thats a lot of wires did you say there is a un solderless jtag available and on the talkback do you cut inbetween the arrows
PM a guy on here called AtmelAce-he does a double headed jtag where you have one lead for paces and one for sammies-it's a spot on piece of kit and you'll wish you had it ages ago before all that soldering!! He gives great service and follow ups with any problems-you wont go wrong.

The 2 arrows are pointing to small capacitors on the board-just remove them with a fine tipped soldering iron-that should do the trick. When you Jtag make sure you wait for the box to go into debug mode before trying to get the numbers-It took me ages to work that one out-they're not like the pace's where you just stick it on and away you go. There's plenty of TUT's in the Samsung section to help as well. Good luck mate
 
Joined
Mar 20, 2005
Messages
790
Likes
3
#6
thanks for the great advice im going to get in touch with atmel soon he sold me my pace one thanks again