orange t911 check

belinea

Inactive User
Joined
May 11, 2005
Messages
30
Likes
0
#1
I am having serious problem communicating with the t911 nexus.

I dont seem to be getting a Rx.

Looking under the board I can see tracks 4 and 5 from the top (with the dip switches facing down) connected to the earth plain, this in the middle of the run from left to right, it looks like a etching mistake.

Can someone with a working board please have a look.

Thanks.
 

belinea

Inactive User
Joined
May 11, 2005
Messages
30
Likes
0
#3
All I get is !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Please help.
 

Marc_dpo

Inactive User
Joined
Mar 11, 2005
Messages
241
Likes
0
#5
R you using a true com port or a usb/serial adapter???? as i think the usb adapter doesnt work when using them on the glitchers.
Is it all flashed with the correct flash (D11) i think it is? when you flashed it did the flash take? what O/S you using and did you have to use the script control for winex??? id go over all of this fiorst and see if you can find fault from there,let us know

Marc
 

bammy

Inactive User
Joined
Nov 29, 2004
Messages
1,510
Likes
3
#6
Are you using the correct dip switch settings - 2 & 5 on; 1,3,4 & 6 off?
 

belinea

Inactive User
Joined
May 11, 2005
Messages
30
Likes
0
#7
I am using a pcmcia to rs232 adaptor which is as good as a true com port.

The dip switches were correct.

I have returned the unit to unapit and we see what results the replacement produces.

I really can't believe that the two points shorting those 2 tracks to earth are correct. I will put some arrows on the photo.
 

spud1966

Moderator
Staff member
Moderator
Joined
May 2, 2005
Messages
9,183
Likes
1,169
#9
Hi belinea

Just had a look on the back of my T911 nexus and you or correct it is a etching mistake!!!!!!!.

Cheers Garry
 
TEST
Top