not finding any channels(no signel)

[pothead130]

i tried these freqs but not getting anythink

St Albans 803.000 no symbol rate given so i used same as lutons

Luton 1 739.000 6.887

Luton 2 755.000 6.887

these areas are near to me but not getting no signel at all doing my head in now

 

[Dingodog]

Wot r u entering the freq as in the box, and wot sym rate do u have in

 

[pothead130]

Wot r u entering the freq as in the box, and wot sym rate do u have in

im entering freq 00755 symbol reate as 06887 as stated for lutun

had tried few others but nothing



i have dm500_nplus_Image_Backup.flash.fwz installed which i downloaded from here

 

[Dingodog]

Are the lock and sync boxes checked, they should do this automatically if the frewq and sym rate r ok, also have u checked the use onit,use bat and network search checked

 

[pothead130]

Are the lock and sync boxes checked, they should do this automatically if the frewq and sym rate r ok, also have u checked the use onit,use bat and network search checked

the lock and sync boxes never get tick


i tried ticking the other boxes still nothing

 

[Dingodog]

Do u know ur area as listed by N*L/Tel West

 

[pothead130]

Do u know ur area as listed by N*L/Tel West

it should be st albans as its only 4miles asway and luton about 7 miles away from welwyngarden city

 

[Speedy2206]

St. Albans is netid 00017 on a pace/sammy box, which means your frequency is 803.000. You are pure NTL, so your symbol rate is 6887.
Try using those values instead of luton.

Not sure if that helps,
Liam

 

[Dingodog]

Check with this www.dslzoneuk.net/ntl_region.php

 

[pothead130]

Check with this www.dslzoneuk.net/ntl_region.php

now box has froze up the lights green wont turn of or on

 

[Dingodog]

Turn it off and on again and use the figs liam has posted and set modulation to 64-QAM and FEC to 3/4

 

[pothead130]

Turn it off and on again and use the figs liam has posted and set modulation to 64-QAM and FEC to 3/4

i done a searh and it says im in http://www.dslzoneuk.net/ntl_region.php?area=langley


langley area but ther no freq listed for that

 

[Dingodog]

Read my prev post m8