I Updated box with obviously wrong Bootloader and have error No Ca Found, I have been reading and is there anyway out of this only with a null modem cable and a computer with a rs232 port?
Thanks for any help.
Like this mate
1--- Connect USB cable to service slot on DM800SE/DM500HD and USB slot on Pc. Windows will then install the driver
You will notice, windows created a virtual Com Port connection to be be used ( in this case Com Port 4)
2 --- Switch Receiver off and connect Network cable Receiver and Router
3 --- Then Start SunRay- FlashUp, Tick Use Network, Fill the relevant boxes with local pc IP and Romote ip of your choose and click Connect.
Program will ask for you to Switch on the receiver.
4 -- It will then go into HTTP mode
5 -- At this stage, you open your browser and insert the romote IP shown on the 800LCD
Page will open as per bellow and then you chose the option Update Firmware.
6 --- Click Browse and navigate to your image
7 --- Chose the image and click Open
8 --- Now click Flash button
9 --- Image will start to
10 --- When it finishes you can click the back button of your browser so we can then send in the bl82 do not reboot
11 Browse and select the SSL82 for your DM800SE Clone
12 --- Once again Click Flash
13 -- After finishing click Reboot. In Most case you will need to do so manually
Box will then reboot and come back to life with image we chose to load. Then you can load your Patched image of your choice as box is functional again
Personally though i prefer to use Japher flasher as the patched DreamUP
