nexus t911 flashing problem

Gooner

Inactive User
Joined
Mar 10, 2005
Messages
684
Reaction score
5
just got my nexus t911 today and when flashing with d11 i get the error
could not find active atmet.
following from the tutorial the t911 is connected with searail cable
9v 300Ma power supply to it
dip witches 1 and 5 are on and rest off
The only thing i cant find is the the switch or the jumper it is talking about which will take the unlooper to program mode.. it says about moving it to left but i cant see anything
please let me knw what i am doin wrong....thnaks
 
Ckeck you have the correct COM port selected

Set jumpers 1 and 6 to ON (down), rest must be OFF when flashing.

Set jumpers 2 and 5 to ON (down), rest must be OFF when Unlocking.
 
you knw what .....phat u r the don
well at least this is sorted
lets c hw the rest goes on

thank you :)
 
nihkil said:
you knw what .....phat u r the don
well at least this is sorted
lets c hw the rest goes on
thank you :)

is there a tut on the nexus t911 as i have one on the way, ans wanna no everything about it? cheers
 
Not much to tell about the Nexus the important thing is a stable power supply (see first post).
You might find your time better spent doing some research on WinExplorer and how to set it up and use the scripts.
 
Back
Top