new motor stopped working

ramraider

Inactive User
Joined
Jun 1, 2005
Messages
1,796
Reaction score
14
OMG not again just had a new motor fitted now the fooking thing has stopped working no green light on the motor have tried it with my technomate and dreambox still no power up there have checked all the cables bottom end all ok


I cant believe this i only had it fitted yesterday :FRIGHT:
 

digidude

Sheep worrier.
VIP Member
Joined
Aug 8, 2001
Messages
24,687
Reaction score
3,515
Location
The edge.
if it was only fitted yesterday get them back out m8
 

digidude

Sheep worrier.
VIP Member
Joined
Aug 8, 2001
Messages
24,687
Reaction score
3,515
Location
The edge.
tell the tight fookr to use enough wire lol, there should be a loop at the back of the dish to allow the dish to turn to its limits, but not rub against anything when the dish is moving as this will cause problems in the future
 

ilkermufc99

Inactive User
Joined
Apr 23, 2007
Messages
15
Reaction score
0
the installer should always test it and check from the outside.
turn the dish from turksat to hispasat and vice versa while checking the dish for any obsticles.
 

ekko star

Inactive User
Joined
Feb 26, 2006
Messages
21
Reaction score
0
The installer couldn't have been that good ! On a motorised dish they should always check for obstacles and enough play in all the cables.
 
TEST
Top