new led simm

[mole365]

just got it today but its doing my headin any body know how too convert leds got this, 1= led on 0= off
sw end 11010001 11110001 11101111 01011001 sent this to tmc

got this back from tmc , if you looking at the leds read right to left on sw1 first and then right to left sw2. ignore the first 0 but start with the first led on (1)

(47cb9af7) this is what he converted it too , i just cant see it??

 

[tmc]

Put the switch on to postion 1 if you are looking at the leds read them right to left. On switch 1 you have the first 8 bk. Put the switch on to postion 2 and read again right to left. This will give you the last 8 bk. You will need to convert bin to hex.

tmc

 

[mentholflash01]

hi mate
does it not give the ird aswell
regards

 

[aftabkhan1]

put it in the middle for the ird or it was with the old led sim not sure about the new 1

 

[dragon25slayer]

no m8 no ird i got mine today works fine for the bk .......... u can get ird from engineers menu or on a sticker on top of the scart socket usually

 

[tmc]

Could not work out how to do the ird so left that bit out. Ird can be easily found so knew it would not be to much hassle

tmc

 

[PaulitoZ]

How did you get;

47cb9af7

From

11010001 11110001 11101111 01011001

I got;

D1 F1 EF 59

Could be my mistake but I'm pretty good with binary conversions and hex conversions is just another step from that.

 

[mole365]

thats what tmc said it was i got same as you that way but should it be
10011010 11110111 10001111 10001011 read right to left??

 

[tmc]

mole the digits that you have wrote which way did you read them right to left or left to right. I may have got confused to how you read them

tmc

 

[tmc]

Yep right to left read from the otherside of the switch and work your way up to the switch.

tmc

 

[spud1966]

just got it today but its doing my headin any body know how too convert leds got this, 1= led on 0= off
sw end 11010001 11110001 11101111 01011001 sent this to tmc

got this back from tmc , if you looking at the leds read right to left on sw1 first and then right to left sw2. ignore the first 0 but start with the first led on (1)

(47cb9af7) this is what he converted it too , i just cant see it??

That dus not make sense to me to m8....


0000 = 0 1010 = A
0001 = 1 1011 = B
0010 = 2 1100 = C
0011 = 3 1101 = D
0100 = 4 1110 = E
0101 = 5 1111 = F
0110 = 6
0111 = 7
1000 = 8
1001 = 9


0100 = 4

 

[mole365]

so as you look at it its the sw then11010001 11110001 11101111 01011001 so what u are saying you read it as
1001-1010- 1111-0111 -1000-1111 1000-1011 ?or
1001-0101-1111-1110-0001-1111-0001-1101?

 

[PaulitoZ]

From the other one

( 10011010 11110111 10001111 10001011 )

I get

9C F7 8F 8B

 

[tmc]

Yes thats right the last bk posted would be correct

tmc

 

[fatblerk]

From the other one

( 10011010 11110111 10001111 10001011 )

I get

9C F7 8F 8B

Be carful not to post the other bits on the open forum m8, you've already posted half your Boxkey ...... lol

 

[PaulitoZ]

Opps, I guess I got too caught up in solving the hex

Even worse, its not my box key, its mole365's

 

[mole365]

its not a box key it was centre reading & i get 9af78f8b is c not 1100

 

[tmc]

Centre reading is not important but good way to learn how to read the simm for asking questions. I knew that postion would come handy.
1001-1010- 1111-0111 -1000-1111 1000-1011 correct way
tmc

 

[mole365]

im i right with 9a?if so i find it easy too write it down as you see it left to right then just turn paper upside down and do hex

 

[PaulitoZ]

i get 9af78f8b is c not 1100

They way I worked it out was

10011010
=156

156/16 = 9.75
16*9 = 144
156-144 = 12

So 9 12 = 9C