well this is the result that i get from the lights that are lit:
3CC33B7F which is either the first part or second part of the bk....i wouldn't advise u though to post ur box on the forum for others to see......
this is how u read it.....if the lights are kinda like half lit, then more than likely it's not inserted properly or poor contacts, or if it's the soldering type, the soldering isn't done properly, however, u will get a bit of light on them as kinda like getting reflected from the one next to it...(back light) but this should only be minor......then.......anything that isn't lit write down as '0' anything that is lit write down as '1' do the bk1 reading first then add the bk2 to the end of it...which will give u 8 sets of bytes...1 block = 1 byte then once converted it will give u a 16 digit number/letters....u can either use a flash tester or calculater to convert it.....this is how i got the number i posted......
the half lit numbers i counted as '0' 00111100 3C
11000011 C3
00111011 3B
01111111 7F
take it out and blow hard down the slot and wiped the contacts on the simm card, and do like the other guy's said, push it slighty forward or back and see if it alters,...ur better of checking it against the ird to see if it's correct
hi there thanks for your reply i have used the led a few times now on a fewboxes never had this problem b4 only on this box dont know why i have mad a fun card as in the usual way but this box just wont have it as u say this only part of the bk so i thought it would be ok to post as i dint put it all up but i had the same code as you still carnt get it to kick in as so to speak
ok will have a gander cheers m8okies. give me a sec and i'll upload a tut in the tutorial section....this tut is for the led simm but not plug and play but the principal is the same, there a tut in there for the p&p but looks confusing so just follow this tut but skip the soldering bit, just follow how to read the simm and convert it.
ok i've put it in the tutorial section
sorry for double post how do i edit the first post so i can get rid of the pic???
hi i dont have edit button on the post only on the last post i made
hi thanks for that i have tryed ever way but cant get the correct bk from this box its a pace 4001 so should be easy as but i dont know what to do next exept take a big hammer to it lol
Hi
As tina has mentioned I dont think the pic should be posted as your bk could be read by others.
Regards
We use essential cookies to make this site work, and optional cookies to enhance your experience.