need help please

[fred6271]

hi all
tryng to flash a n*l250 but i cant press p/1/2
here is what i'm getting in hyper
could someone have a look at see if they can help me please
thx







BCM3349A0
100000010346890
MemSize: ......................... 8M
Flash detected @0xbe000000

Signature: a603


Broadcom BootLoader Version: 2.1.6d release Gnu
Build Date: May 10 2004
Build Time: 19:06:46

Image 1 Program Header:
Signature: a603
Control: 0005
Major Rev: 0000
Minor Rev: 0000
Build Time: 2004/12/7 07:26:56 Z
File Length: 799759 bytes
Load Address: 80010000
Filename: ecram_sto.bin
HCS: e958
CRC: 2f658482


Image 2 Program Header:
Signature: a603
Control: 0005
Major Rev: 0000
Minor Rev: 0000
Build Time: 2004/12/7 07:26:56 Z
File Length: 799759 bytes
Load Address: 80010000
Filename: ecram_sto.bin
HCS: e958
CRC: 2f658482



Enter '1', '2', or 'p' within 2 seconds or take default...
. .

Performing CRC on Image 2...
Detected LZMA compressed image... decompressing...
Target Address: 0x80010000
............
Decompressed length: 3146090

Executing Image 2...


eCos - hal_diag_init
Init device '/dev/ttydiag'
Init tty channel: 803030d0
Init device '/de
Init tty channel: 803030f0
Init device '/dev/haldiag'
HAL/diag SERIAL init
Init device '/dev/ser0'
BCM 33XX SERIAL init - dev: fffe0300.2
Set output buffer - buf: 803388b0 len: 2048
Set input buffer - buf: 803390b0 len: 2048
BCM 33XX SERIAL config
-- GlobalRegion Info --
Size Device
Block kB Address
----- ----- ---------
0 16 0xbe000000
1 8 0xbe004000
2 8 0xbe006000
3 32 0xbe008000
4 64 0xbe010000
5 64 0xbe020000
6 64 0xbe030000
7 64 0xbe040000
8 64 0x
9 64 0xbe060000
10 64 0xbe070000
11 64 0xbe080000
12 64 0xbe090000
13 64 0xbe0a0000
14 64 0xbe0b0000
15 64 0xbe0c0000
16 64 0xbe0d0000
17 64 0xbe0e0000
18 64 0xbe0f0000
19 64 0xbe100000
20 64 0xbe110000
21 64 0xbe120000
22 64 0xbe130000
23 64 0xbe140000
24 64 0xbe150000
25 64 0xbe160000
26 64 0xbe170000
27 64 0xbe180000
28 64 0xbe190000
29 64 0xbe1a0000
30 64 0xbe1b0000
31 64 0xbe1c0000
32 64 0xbe1d0
33 64 0xbe1e0000
34 64 0xbe1f0000
Reading Permanent settings from non-vol...
Checksum for permanent settings: 0xd67ad26c
Settings were read and verified.


Reading Dynamic settings from non-vol...
Checksum for dynamic settings: 0xb0fe9d4c
Settings were read and verified.

Current Boot Image : 2
file length= 799759
program header length :92
Flash driver opened.
magic Num : 1634563696
length :55
crc :e3e1b251
Total Parse 18 element
ParseTLV Successd !
Tag : 11, Length : 1, Value =1
Tag : 12, Length : 1, Value =1
Tag : 13, Length : 1, Value =1
Tag : 14, Length : 1, Value =0
Tag : 15, Length : 1, Value =0
Tag : 16, Length : 1, Value =0
Tag : 17, Length : 1, Value =0
Tag : 18, Length : 1, Value =1
Tag : 19, Length : 1, Value =1
Tag : 1a, Length : 1, Value =1
Tag : 1b, Length : 1, Value =0
Tag : 1c, Length : 1, Value =0
Tag : 1d, Length : 1, Value =0
Tag : 1e, Length : 1, Value =0
Tag : 29, Length : 1, Value =1
Tag : 1e, Length : 1, Value =0
Tag : 2d, Length : 1, Value =3

vvv Interface creation and driver startup beginning vvv

-> Begin DOCSIS CM WAN interface
Creating HAL object for the DOCSIS CableModem interface
numFreqPlan 3
Registering DOCSIS CableModem driver
-> End DOCSIS CM WAN interface

-> Begin Ethernet LAN interfaces
Creating HAL object for the Ethernet interface
Registering Ethernet driver
-> End Ethernet LAN interfaces

-> Begin USB LAN interface
Creating HAL object for the USB interface
Registering USB driver
-> End USB LAN interface

-> Begin IP Stack interfaces
-> Starting V2 DHCP Client subsystem...
Creating HAL object for IP Stack1 (MAC Addr=00:0e:9b:e4:f3:1a)
Registering IP Stack1 driver

Creating HAL object for IP Stack2 (MAC Addr=00:02:8a:de:ad:02)
Registering IP Stack2 driver

IP Stack3 not enabled or failed to create and start interface; no other
stacks will be loaded.
-> End IP Stack interfaces

^^^ Interface creation and driver startup com

Propane version: 2.0.1 (28 Oct 2002)
T-LinuxAgent:AgentInitSnmp
Creating SNMP agent cablemodem agent
LX- Now in AgentStartSnmp()
LX-AgentStartSnmp:
DON'T think we need to go here - so don't:::: init_mib !!!!
WARNING: netsnmp_brcm_create_tstring called with no address!


NOT Calling VacmTest for debug users
NOT STARTING THE LOCAL snmp thread!! - must be using the v2
LX- Now in AgentStartSnmp() - finished
Creating SNMP agent CPE diag agent
LX- Now in AgentStartSnmp()
LX- Now in AgentStartSnmp() - finished
Eric --> Create AmbitLedController


*
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *

* * * *
* * * * * * ***
* * * * * * * * *******************
* * * * * *
* *

Broadcom Corporation Reference Design

+----------------------------------------------------------------------------+
| _/_/ _/_/_/_/ _/_/ |
| _/ _/ _/ _/ _/ Broadba
| _/ _/ _/ _/ |
| _/_/ _/_/_/ _/ Foundation |
| _/ _/ _/ _/ |
| _/ _/ _/ _/ _/ Classes |
| _/_/_/ _/ _/_/ |
| |
| Copyright (c) 1999 - 2004 Broadcom Corporation |
| |
| Revision: 3.5.0 RELEASE |
| |
| Features: MinimalConsole Nonvol Slim HeapManager SNMP Networking |
+----------------------------------------------------------------------------+
| Standard Embedded Target Support for BFC |
| |
| Copyright (c) 2003-2004 Broadcom Corporation |
| |
| Revision: 3.0.1 RELEASE |
| |
| Features: PID=0xa603 Bootloader-Rev=2.1.6d |
| Features: Bootloader-Compression-Support=0x19 |
+----------------------------------------------------------------------------+
| eCos BFC Application Layer |
| |
| Copyright (c) 1999 - 2004 Broadcom Corporation |
| |
| Revision: 3.0.2 RELEASE |
| |
| Features: eCos Console Cmds, (no Idle Loop Profiler) |
+----------------------------------------------------------------------------+
| _/_/ _/ _/ |
| _/ _/ _/_/ _/_/ DOCSIS Cable Modem |
| _/ _/ _/ _/ |
| _/ _/ _/ |
| _/ _/ _/ CableLabs Certified |
| _/ _/ _/ _/ tComLabs Certified |
| _/_/ _/ _/ |
| _/_/ _/ _/ |
| Copyright (c) 1999 - 2004 Broadcom Corporation |
| |
| Revision: 3.5.0 RELEASE |
| |
| Features: AckCel(tm) DOCSIS 1.0/1.1/2.0 Propane(tm) CM SNMP w/Factory MIB |
| Features: Support CM Vendor Extension |
+----------------------------------------------------------------------------+
| Broadcom Data-Only CM Vendor Extension |
| |
| Copyright (c) 1999 - 2004 Broadcom Corporation |
| |
| Revision: 3.2.2 PRE-RELEASE |
| |
| Features: DHCP Server HTTP Server |
+----------------------------------------------------------------------------+
| Build Date: Dec 6 2004 |
| Build Time: 15:26:46 |
| Built By: eric |
| Firmware version : 2.94.1010 |
| Hidden version : 2.94.1010b |
+----------------------------------------------------------------------------+

Console is Disabled by Vendor Profile

 

[tremo1984]

try takeing number lock off

 

[fred6271]

hi thx for reply
just tryed that and no joy !
is it poss that there is something wrong with my max cable?

 

[random_paddy]

Double check your cable connections, Think this has happened to many many people. Just cos you've got a display back doesnt mean that all your connectors are making it. Double check that and if that doesnt work, try adjusting your Hyperterminal settings (dont think this will help tho)
Most issues i've heard are a loose connection.
Best of luck lad.

Random

 

[fred6271]

hi thanks for reply
i tryed soliderin wires on to modems and still same prob
i've ordered a new max 232 fingers crossed it'll work
i'll let you guys know how i get on

 

[fred6271]

hi all just like to say thx for ya help
i've sorted it
it was my max cable
cheers

 

[tremo1984]

hi all just like to say thx for ya help
i've sorted it
it was my max cable
cheers

hi mate im having same prob now was it the cabel or the board

thanks

 

[fred6271]

hi pal
i think it was board i got a new one from http://cgi.ebay.co.uk/MAX-232-EQ-23...rkparms=72:12|39:1|65:12&_trksid=p3286.c0.m14

 

[tremo1984]

k cheears m8t