<< MStar >># ?
do Lzma for compress image
autoboot - Continue auto-boot flow
base - print or set address offset
bdinfo - print Board Info structure
boot_logo - Logo display
bootm - boot application image from memory
cmp - memory compare
coninfo - print console devices and information
cp - memory copy
cpmsbin - Copy ms bin file (Chakra) from nand to dram
crc32 - checksum calculation
cusid check the image is release by the valid guys
dcache - enable or disable data cache
draw_pixel - draw a pixel with color
draw_string - draw string with color
draw_rect - draw rect with color
draw_string - draw string with color
du - Disable UART
dynpart [<mtd-def>] - dynamically calculate partition table based on <mtd-def>/'dynparts' and BBT (it is better to set the last partition size to SIZE_REMAINING)
env2flash - read environment parameter file and restore it to flash
envbin - read out environment parameter and store it to usb disk
erase - erase FLASH memory
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls - list files in a directory (default /)
fatwrite - write binary file to a dos filesystem
flinfo - print FLASH memory information
go - start application at address 'addr'
help - print online help
loop - infinite loop on address range
md - memory display
mm - memory modify (auto-incrementing)
mstar - update kernal & root file system automatically by script file
mtdparts- define flash/nand partitions
mtest - simple RAM test
mw - memory write (fill)
ustar - update kernal & root file system automatically by script file
nm - memory modify (constant address)
osd_create - create osd layer
osd_destroy - destroy osd layer
pnlinfo - set panel info and save to nand flahs
printenv- print environment variables
protect - enable or disable FLASH write protection
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
set_paneltype [type] - Set Mboot panel type and store the type value in env
setenv - set environment variables
spi_create : create a partition
spi_dma - SPI copy data from flash to DRAM by PIU DMA
spi_ea - SPI erase all
spi_eb - SPI erase block
spi_gfo - SPI get flash info
spi_gr - SPI get Chip Rev
spi_id - SPI read ID
spi_in - SPI initialization
spi_part : list all partition info
spi_ptinit : init partition table
spi_r - SPI read commands
spi_rb - SPI read buffer
spi_rdc - SPI read code from SPI flash to DRAM
spi_rdc_p : read data from DRAM to SPI partiton
spi_rmgpt : remove all partition
spi_rs - SPI read status
spi_w - SPI write commands
spi_wb - SPI write buffer
spi_wp - SPI write protect
spi_wrc - SPI write code from DRAM to SPI flash
spi_wrc_p : write data from DRAM to SPI partiton
sspi - SPI utility commands
sysinfo - set system info and save to nand flahs
usb - USB sub-system
ustar - update kernal & root file system automatically by script file
usbboot - boot from USB device
ustar - update kernal & root file system automatically by script file
version - print monitor version
Where did you get the pinout for uart adas ?Mstar:
Cau Adas
Do you know how to use a scope or logic analyzer? Its normally not that many connectors to probeWhere did you get the pinout for uart adas ?
Thanks
i have already done with logic analyzer and nothing it talking to me thats why my question.Do you know how to use a scope or logic analyzer? Its normally not that many connectors to probe
the pinout for uart mr adas run on dreambox 800HDse CPU bcm7405
dear i have problem on surflock you have solution ?all irderto card (different caid) all using HW paired, not easy run card by oscam (using surflock also)
nagra cak7 for Mstar CPU can't hack also, sure not solution for anynone
We use essential cookies to make this site work, and optional cookies to enhance your experience.