Mod1 and Mod2 calculation

¿Quién puede ayudarme a extraer esta información mediante un archivo de volcado?

mod1
data50
mod50
key60
exp60
cwpk
hola a todos por mi parte tambien ando en lo mismo arranco mi oscam_smod y me da entendidos al dia y todo pero cuando empieza a pedir paquetes de la card queda en negro algo ando haciendo mal ayudainicio.jpg
 
who can help me extract these info by dump file?

mod1
data50
mod50
key60
exp60
cwpk
ou were able to find out how to boot the card with CAK7, I have one that I am doing with PCSC reader and it gives me this message

detected card in CAK7 mode
2021/12/16 19:24:42 72643A06 r (reader) Card1 [pcsc] Rom revision: DNASP420 RevS64
2021/12/16 19:24:42 72643A06 r (reader) Card1 [pcsc] no MOD1 defined
2021/12/16 19:24:42 72643A06 r (reader) Card1 [pcsc] card system not supported
 
SMT-S5240 i have flash dump 135mb but nothing
any one know how to dump the active memory?
this on uart only show info from sti and version
 
SMT-S5240 i have flash dump 135mb but nothing
any one know how to dump the active memory?
this on uart only show info from sti and version
Thanks for your response @kineck , if I may ask how did you get the flash dump?
There are JTAG and RS232 ports on the board and I couldnt find a suitable software to dump it.
 
Thanks for your response @kineck , if I may ask how did you get the flash dump?
There are JTAG and RS232 ports on the board and I couldnt find a suitable software to dump it.
UPDATE
I removed the sti from this board, and followed the JTAG pins i think that are ok, not tested yet
1 - B29 NOTASEBRK
2 - B31 TRIGGERIN
3 - C1 TCK
4 - B1 TDO
5 - GND
6 - A1 NOTTRST
7 - VCC
8 - B2 TDI
9 - C2 TMS
10 - C29 TRIGGEROUT
 
any one can give something how make activedump on it?
 
any one can give something how make activedump on it?
all data on dump is crypted so for what you need it ?
pm me your board photo or post here your skype id so may be i can help you more
 
Back
Top