liteon 93450C badly need help

[silverdale]

cut a long story short im using the ck3 pro and the ck3 probe 2.
i've managed to dump the OFW and solder the cut tracks back up ( checked them with meter and their fine) but now i cant get it to flash.
can someone please tell me in what order i do what for flashing ?.
im not sure if and when to hold the probe and press what as me heads right up me clinker with all this !!.

 

[Bad_Ad84]

make sure original firmware is fine, then erase the drive. once blank you will be able to flash it.

 

[silverdale]

so once you've read the drive and dumped the OFW how do you flash it ?? with / without using the probe ? before or after soldering the tracks back to as they were ? im lost.

 

[Bad_Ad84]

return drive to how it was (resolder tracks etc), once you have the firmware you dont need the probe anymore.

you just need to erase the drive, then it will let you program it.

just google for a jungleflasher tutorial.

 

[silverdale]

it turns out my ck3 mode button is on the blink so luckily ive a maximus,,, al sorted now ,,,thanks for the quick reply.