keeps streaming checknig for freq

zeedy2k

Member +
Joined
Aug 8, 2001
Messages
179
Reaction score
0
Location
Belfast, United Kingdom, United Kingdom
when I connect the max interface and put power through the modem, Hyperterminal keeps trying to get a freq and saying "No Power... Nothing...."

It wont let me change the mac... anyone got any ideas?

Its a ntlhome:120

Thanks
 

fred141291

Inactive User
Joined
Jun 12, 2005
Messages
70
Reaction score
0
hit any key within 2 sec of powering up to stop modem booting
 

zeedy2k

Member +
Joined
Aug 8, 2001
Messages
179
Reaction score
0
Location
Belfast, United Kingdom, United Kingdom
I have done a 200 before but this is the first time I have done a 120... this one gives some menus instead of typing the commands like Im used too... anyone got the steps to do a 120??
keep getting this....

Checking center frequency of 762750000... No Power...nothing!
Checking center frequency of 770750000... No Power...nothing!
Checking center frequency of 778750000... No Power...nothing!
Checking center frequency of 786750000... No Power...nothing!
Checking center frequency of 794750000... No Power...nothing!
Checking center frequency of 802750000... No Power...nothing!
Checking center frequency of 810750000... No Power...nothing!
Checking center frequency of 818750000... No Power...nothing!
Checking center frequency of 826750000... No Power...nothing!
Checking center frequency of 834750000... No Power...nothing!
Checking center frequency of 842750000... No Power...nothing!
Checking center frequency of 850750000... No Power...nothing!
Checking center frequency of 98750000... Power...nothing!
 

zeedy2k

Member +
Joined
Aug 8, 2001
Messages
179
Reaction score
0
Location
Belfast, United Kingdom, United Kingdom
can anyone help??? just keep getting:

Start to search a downstream frequency
Start history frequency search:
History frequency:586750000 hz, result-->No Power...Channel does not exist!
End of history frequency search

Changing Freq plan to...............PAL_I_HRC
Power...Checking center frequency of 578750000... Power...nothing!
Checking center frequency of 586750000... No Power...nothing!
Checking center frequency of 594750000... No Power...nothing!
Checking center frequency of 602750000... No Power...nothing!
Checking center frequency of 610750000... No Power...nothing!
Checking center frequency of 618750000... No Power...nothing!
Checking center frequency of 626750000... No Power...nothing!
Checking center frequency of 634750000... No Power...nothing!
Checking center frequency of 642750000... Power...nothing!
Checking center frequency of 650750000... No Power...nothing!
Checking center frequency of 658750000... No Power...nothing!
Checking center frequency of 666750000... Power...nothing!
Checking center frequency of 674750000... Power...nothing!
 

Monty

Member ++
Joined
Oct 25, 2004
Messages
424
Reaction score
3
When you first power the 120 on you should see "briefly" something like this and at the bottom "To change any of this, press any key within 2 seconds".

If you dont see the bottom part or it wont let you in when you press a key then I think you have the update.

You need to reflash the mxchip with preupdate 120 flash from downloads.

BCM3345
134ce7865
Boot Code SW Version 3.11.1

BCM3345 Ambit
S12ce7865Detect MXIC MX219LV160B Flash

Ambit Cable Modem Console Management
--------------------------------------------------------------------------
NETWORK INTERFACE PARAMETERS:
IP address on LAN is 192.168.100.1
LAN interface's subnet mask is 255.255.255.0
HARDWARE PARAMETERS:
This board's Ethernet hardware address is **:**:**:**:**:**
This board's USB Interface hardware address is **:**:**:**:**:**
CABLE MODEM APPLICATION PARAMETERS:
IP address of the TFTP host is [62.253.189.101]
The file to download and start is ntlhm100_ntl0002.cpr
--------------------------------------------------------------------------
To change any of this, press any key within 2 seconds
 
TEST
Top