jtag vu+ duo

biwise

New Member +
Joined
Nov 14, 2020
Messages
6
Reaction score
1
Bonjour.
Je recherche broadcom studio 3 pour faire jtag de mon vu+ duo.
Merci
 
bonjour.
Je recherche egalement le pilote BCM 97335 .
C'est introuvable ou non ?
Merci
 
Bonjour .
J'ai trouvé l'interface cyprees en usb .
 
Il me manque ces 2 outils .
Si quelqu'un sais ou je trouver je le remercie par avance.
 
Mon duo ne redemarre plus, il bloque sur starting et ne prends plus les clés usb .
Donc je dois faire un jtag
 
I use a translator.
Thanks for your help, but already done and it worked but now it hangs on starting, does not take the usb drive. all checked the voltages, everything is correct . it remains for me that the jtag
 
I had a duo 2 hang on starting 2 years ago all voltages were correct no bulging caps I tried a new power board and it worked fine
 
sometimes replacing the obviously bulging capacitors isnt enough. Other caps could be faulty, as well as the viper chip

replacing the entire PSU board (if you dont have electronic experience and the tools and parts to swap over) is the easiest way
 
Back
Top