Is my Ambit 200 still usable?

if you cant get in to hypertirminal to change the mac then its no good , only way to fix is get a new dump and reflash it
 
Whip the chip out dump it and write new mac
 
gaz.t said:
Whip the chip out dump it and write new mac

wat programmer do u need m8 , and how much is it for the programmer ?
 
use a up48 to prog, Use Hot air to take the chip off
 
programmer

You will need a willem programmer the 200 ambit dump ur max232 to put the mac back on it once u av flashed the atmel and the no update command u copy in the script just b4 u enter ur mac in with the cable feed off ok

Asummeing u no wot ur doing u need all the above i ve mentioned
 
mmg123 said:
You will need a willem programmer the 200 ambit dump ur max232 to put the mac back on it once u av flashed the atmel and the no update command u copy in the script just b4 u enter ur mac in with the cable feed off ok

Asummeing u no wot ur doing u need all the above i ve mentioned


THANKS ,
PS WHERE CAN I GET A CHEAP WILLEM PROG ?
 
mach7 said:
THANKS ,
PS WHERE CAN I GET A CHEAP WILLEM PROG ?

willem.org you need the 4.5 as it has the 48 pin connector for the mx chip.
 
Last edited:
Back
Top