infinity usb unlimited

R

ritchie123

Inactive User
Joined
Jan 31, 2006
Messages
252
Reaction score
0
hi all

i have the above programmer and im havin lots of probs

i have glitched me rom 11 cards always says its done and in the past i havent had n e probs reading or writing cards until yeaterday

i glitched me card as normal and when going to read in nagra i get the 2 following messages

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM Revision: 011
EEPROM Revision: RevB0D
ProviderID: 00
CamID: 00 00 00 00
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BD3 login failed
Reading ROM11 failed
Closing of COM1 was successful



Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 39 41
ROM Revision: 011
EEPROM Revision: RevB09
ProviderID: 00
CamID: 21 05 06 03
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BD3 login failed
Reading ROM11 failed
Closing of COM1 was successful

or sometimes it mite say set ifs failed

i have tried to reapiar the numerous amout off times and never had success

just wondering if some 1 can help me solve this problem
 
i had the same problem, have you updated to the newest software revision 2.65 i think it is, if so go back to 2.63 this solved my problem, i got the 2.63 software from the download section on this forum.
 
yes this is using nagra edit and im using version 2.63 software as i didnt allow the update
 
have you set nigra edit to run in windows 98 mode and make sure your virtual com port is the same as niagra
 
use xncs................
 
both comports are set the same - nagra is ran in windows 98 mode - ive tried xcns but that is not openin the card either

ive just tried nagra again and go this message

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 39 41
ROM Revision: 011
EEPROM Revision: RevB09
SetIFS failed
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Reading ROM11 failed
Closing of COM1 was successful

hope some 1 can help me on this problem

also to let u no it reads and writes funcards no probs
 
Last edited:
you props no this ...first clean the card make sure you have phoenix mode running.. and in incxs install a ghost
 
ive just tried that m8 as mentioned above and still the same

i have uninstalled the software and reinstalled it

it keeps giving me the same cam id for both cards which is unusual

and it still wont let me repair my rev b09 card in rev 7 or mrom

also in xcns just says no atr from card but i no these cards are ok
 
just an update i have glitched me card again and still the infinity wont read the card

has n e body else had this problem before
 
try diffrent port after that no idea
 
just to let you know having the exact sample problems with my usb infinity unlimited..... glitched the cards but nagra and all the other programmes.... cant read it .....getting different errors but seems to be a problem with infinity unlimited software...... i to have downgraded but still i cant seem to get it work...... seems to me like the cheap and cheerful programmers have less to deal with in as much as the good at a reading and programming a few rom and funcards as opposed to claiming they can multi task........ serial port progammers seem to have less problems usb because i feel its the virtual or emulated driver ports is where bad communication lies............. anyway if i get any joy i will PM you to let you know all the best : multi :
 
ritchie123 said:
hi all

i have the above programmer and im havin lots of probs

i have glitched me rom 11 cards always says its done and in the past i havent had n e probs reading or writing cards until yeaterday

i glitched me card as normal and when going to read in nagra i get the 2 following messages

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM Revision: 011
EEPROM Revision: RevB0D
ProviderID: 00
CamID: 00 00 00 00
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BD3 login failed
Reading ROM11 failed
Closing of COM1 was successful



Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 39 41
ROM Revision: 011
EEPROM Revision: RevB09
ProviderID: 00
CamID: 21 05 06 03
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BD3 login failed
Reading ROM11 failed
Closing of COM1 was successful

or sometimes it mite say set ifs failed

i have tried to reapiar the numerous amout off times and never had success

just wondering if some 1 can help me solve this problem
Click to expand...

ProviderID: 00 is this not soft looped ? m8
 
tied everything mentioned above and still got no joy using nagra 4.1 or xcns or even repairing a card

and what do u mean by soft looped
 
ritchie123 said:
tied everything mentioned above and still got no joy using nagra 4.1 or xcns or even repairing a card

and what do u mean by soft looped
Click to expand...

did u try mrom to repair ? it worked for me with with a b09

Tx_Delay = 180
Rx_delay = 180
Loop_delay = 80


cheers
 
just tried them delays and still no luk i think i will buy a infinity usb phoenix n see if that helps
 
Was having the same problem with mine but I've managed to get it right now. The problem with mine seemed to lie with the driver. It took me ages to uninstall it. I have installed software version 2.61 and its' running fine again.

Chookey
 
chookey said:
Was having the same problem with mine but I've managed to get it right now. The problem with mine seemed to lie with the driver. It took me ages to uninstall it. I have installed software version 2.61 and its' running fine again.

Chookey
Click to expand...


hi m8 can u tell me how to fully unistall as ive got the program but but when i go to take the drivers out it says device not found and the programmer lite is still blue and i no when the drivers are full out it flashes red

please help sum 1
 
You must log in or register to reply here.

Similar threads

S
help to understand log
Replies
1
Views
761
acebing
A
jspk
N3 extract
Replies
18
Views
4K
hamo barca
H
B
VU+ Solo Vu+ Solo Ferrari Crash Loop
Replies
4
Views
2K
Bk456
B
Napster
Confucius say hehehe
Replies
0
Views
636
Napster
Napster
eon
    • Like
ND$ EMM Breakdown
Replies
0
Views
3K
eon
eon
Back
Top