infinity usb un

cushy17

Inactive User
Joined
Jan 2, 2007
Messages
303
Reaction score
2
Location
sunderland
hi all
i have an unlocked rom 11 which i dont seem to be able to readin nagra or xncs yes ALL the settings are correct. the rev is a bo4. i have read on some other forums that the vcp is a bit iffy. any one else had a problem using this proggy. do i need to change anything in bios. all help appreciated
thanks in advance
cushy17
 

ice2004

Inactive User
Joined
Mar 6, 2006
Messages
4,606
Reaction score
56
Location
Glasgow
hi all
i have an unlocked rom 11 which i dont seem to be able to readin nagra or xncs yes ALL the settings are correct. the rev is a bo4. i have read on some other forums that the vcp is a bit iffy. any one else had a problem using this proggy. do i need to change anything in bios. all help appreciated
thanks in advance
cushy17

Have you got it in phoneix mode? Whats the message you get in nagra?
 

cushy17

Inactive User
Joined
Jan 2, 2007
Messages
303
Reaction score
2
Location
sunderland
yea all settings correct win 98 mode, pheonix, 368mhz this is what i get

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 34 4C
ROM Revision: 011
EEPROM Revision: RevB04
SetIFS failed
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Reading ROM11 failed
Closing of COM1 was successful
 

ice2004

Inactive User
Joined
Mar 6, 2006
Messages
4,606
Reaction score
56
Location
Glasgow
Make sure everything is set on com1 and restart PC. Double check everything is still on com1 and try again.
 

cushy17

Inactive User
Joined
Jan 2, 2007
Messages
303
Reaction score
2
Location
sunderland
Make sure everything is set on com1 and restart PC. Double check everything is still on com1 and try again.

yea ice rebooted still on com 1 still the same mate. am starting to pull my hair out now lol
in nagra when holding ctrl and d what boxes need to be checked
 

ice2004

Inactive User
Joined
Mar 6, 2006
Messages
4,606
Reaction score
56
Location
Glasgow
is this the same card as you had a problem with last week that had a setifs failed problem?
 

gazzas

DW Member ++
Joined
Mar 5, 2005
Messages
1,208
Reaction score
12
you get SetIFS failed when nagra isnt set in windows 98 mode also
 

cushy17

Inactive User
Joined
Jan 2, 2007
Messages
303
Reaction score
2
Location
sunderland
no mate my mate glitched it as it was a bod. if it had a blockered image on it would it be saying set iffs failed, coz my mate put a blockered image on it but left bk ird blank so i could write it when i got another box
 

ice2004

Inactive User
Joined
Mar 6, 2006
Messages
4,606
Reaction score
56
Location
Glasgow
Are you using a true serial port or a usb serial port? If its a USB serial port take all other USB devices out just leaving your programmer in.
 

cushy17

Inactive User
Joined
Jan 2, 2007
Messages
303
Reaction score
2
Location
sunderland
yea mate usb. its the only thing in apart from printer but is that not lpt1 or should i take that out also
 

charlie senator

VIP Member
VIP Member
Joined
Nov 25, 2005
Messages
6,252
Reaction score
505
Location
northants
these are the settings i use with my unlimited cushy if its any help
Settings in programmer s/w >>OPTIONS>>GENERAL, the following boxes ticked, remember directory on file load, beep when done, disable verify of ext eeprom
Advanced, Autodetect cpu before write/read/erase
Startup Check for new updates, Show splashscreen

ADVANCED (at bottom of screen) Mode 1 off


NAGRA EDIT
Ensure this is set to windows 98/me compatability (this is a must)

Options All boxes ticked
Communications error retry count 10
d2c max jump count 20
crystal 3.6864mhz

Rom 10+11
No response count out 3
No response retry count 3

make sure com port are set the same
 

ice2004

Inactive User
Joined
Mar 6, 2006
Messages
4,606
Reaction score
56
Location
Glasgow
yea mate usb. its the only thing in apart from printer but is that not lpt1 or should i take that out also

Nagra doesnt seem to like usb programmers. What power supply are you using? Do you have a 12V one you could use?
 

cushy17

Inactive User
Joined
Jan 2, 2007
Messages
303
Reaction score
2
Location
sunderland
Nagra doesnt seem to like usb programmers. What power supply are you using? Do you have a 12V one you could use?

ice the power comes direct from usb lead mate. is there a way of changing p/supply? if so how? anything worth a try. i have however used it to read a card before
 

cushy17

Inactive User
Joined
Jan 2, 2007
Messages
303
Reaction score
2
Location
sunderland
charlie

these are the settings i use with my unlimited cushy if its any help
Settings in programmer s/w >>OPTIONS>>GENERAL, the following boxes ticked, remember directory on file load, beep when done, disable verify of ext eeprom
Advanced, Autodetect cpu before write/read/erase
Startup Check for new updates, Show splashscreen

ADVANCED (at bottom of screen) Mode 1 off


NAGRA EDIT
Ensure this is set to windows 98/me compatability (this is a must)

Options All boxes ticked
Communications error retry count 10
d2c max jump count 20
crystal 3.6864mhz

Rom 10+11
No response count out 3
No response retry count 3

make sure com port are set the same





charlie mate i dont have this option
ADVANCED (at bottom of screen) Mode 1 off
 

benny59

Premium Member
Premium Member
Joined
Nov 21, 2001
Messages
5,160
Reaction score
36
Location
northwest
charlie mate i dont have this option
ADVANCED (at bottom of screen) Mode 1 off

m8, it might be your pc isnt supplying enough voltage to the usb ?????? {usb hub with an external power supply should cure this}
 

cushy17

Inactive User
Joined
Jan 2, 2007
Messages
303
Reaction score
2
Location
sunderland
m8, it might be your pc isnt supplying enough voltage to the usb ?????? {usb hub with an external power supply should cure this}


cheers benny
any links to where i can get a cheap one
 
TEST
Top