Infinity Unlimited, Problems reading card in Nagraedit

T

tw_broadband

Guest
I have a Infinity USB Unlimited, having problems to read in nagraedit..

i have rom10 card and need to read to it... when i try to make an atempt to read it i get the following message...

Opening of COM1 was successful
Reset failed
Error reseting card, ATR string invalid
Closing of COM1 was successful


i have tried it with com1 to com8 still nothing
 
ensure you have the serial lead connecte3d and the programmer is in phoenix mode
 
how do i make sure it is in phoenix mode, lead is ok it works with unlimited software
 
tw_broadband said:
I have a Infinity USB Unlimited, having problems to read in nagraedit..
i have rom10 card and need to read to it... when i try to make an atempt to read it i get the following message...
Opening of COM1 was successful
Reset failed
Error reseting card, ATR string invalid
Closing of COM1 was successful
i have tried it with com1 to com8 still nothing
I know where you're coming from mate, same here. I have the same prog but it is giving me the same error when using my T911. I have maybe unlocked 2 cards but am unable to confirm them.
TX Data : 20 00 FF 0E 05 85 00
RX Data : 60 06
RX Data : 12 00 07 80 03 B1
********************************
* ROM11 B0C EMM sent *
* ROM11 B0C cam should be open *
* test in Nagra to see. *
* if not, try again. *
********************************
I go straight into Nagra and get the same error as you.
 
are you using XP
are you running nagraedit..in compatability mode?
also are both coms set the same?
 
both comms are set same, using xp, tried it on win me and 98..
 
tw_broadband said:
I have a Infinity USB Unlimited, having problems to read in nagraedit..
i have rom10 card and need to read to it... when i try to make an atempt to read it i get the following message...
Opening of COM1 was successful
Reset failed
Error reseting card, ATR string invalid
Closing of COM1 was successful
i have tried it with com1 to com8 still nothing
On your usb programmer go into tools/vcp.Select com 1 and enable. Open up nagra and read card.
regards...............Chookey
 
still doesnt work..

what if i buy a infinity phoenix, will that resolve my problem
 
Hi :BLOBBY:
Check the card is right way up
Check both vcp mode and nagra com port settings
Otherwise it has to be the cable
Also r u rebooting each time
 
When the infinity unlimited is in vcp mode the led will be a pinkish colour.I had the same problem as you and now it reads no prob. Won't read the atr in xncs though, still working on that one.
 
yes it goes in pinkish colour, i have tried everything cant get it to work.. bought it new from ebay (powerseller)

but will a phoenix work
 
Back
Top