How to Update to 16197 on a JTAG or RGH Console

Some games will only work if the console has a minimum dashboard. You will have to update sooner or later.
 
cheers mate, im ok just now everything is running well.
Not at the moment , if you need to update i can make the update image for you mate.Just need to give me the xbox serial number , as i have a copy of your nand dumps still.
 
Yes.

RGH 1/RGH 2/"JTAG" are only methods to load alternate firmware. The software posted only makes the firmware for you.

Make sure you select the correct settings for your console, model, type of hack etc.

I need to up my dash for Max Payne 3 etc. just didnt fancy having to RGH 2 lol. Nice one m8
 
just did my xbox360 to the 16197 cheers guys ;)

question do i have to install the SystemUpdate_16197_USB as well guys ???

cheers Spud
 
cheers Abu Baniaz

one last question do i have to take my drive back to stock m8 ???????????
 
cheers Abu Baniaz

one last question do i have to take my drive back to stock m8 ???????????
 
Found this thought id share the info.....


Instructions:
Skip to step 5 if you already have a backup NAND and your CPU key
1. Boot into XeLL (with the console turned off, press the eject button)
2. Copy CPU key down onto notepad (if you are connected via ethernet to your network, simply type in the IP address and
then copy the CPU key from there; if you are not, manually copy the code)
3a. If you are connected to the network page (for XeLL), click "download" next to the "Raw Flash" section
3b-1. If you are not connected to the network, run flash360 on your Xbox (place on USB drive and launch using XeX menu,FSD, etc)
3b-2. Press X to backup your NAND
3b-3. Once completed, exit the application
4. Power down the Xbox (and remove flash drive if you used flash360)
5. Launch XeBuild GUI 2.085
6. Click open next to source file and select your flashdmp.bin
7. Click save next to output path and select the root of your flash drive (save as updflash)
8. In the keys section, paste your CPU key
9. At the bottom right of the screen, press check KV (this makes sure the CPU key is correct and will properly build your image)
10. In kernel version, select 2.0.16197 (if not already selected)
11. Double check build type, motherboard, XeLL, and SMC Hack (JTAG ONLY)
12. Press "Generate $acked Image"
13. Once completed, unplug your flash drive
14. Plug your flash drive into the Xbox (with the console OFF)
15. Boot into XeLL (press eject button with the console off)
16. The image should begin to flash (rawflash v4 initiated, etc)
17. Once complete, power down the Xbox
18. Unplug flash drive
19. Power on the Xbox

Congratulations, you have successfully updated to dashboard 16197


Filse list
Total file:4
dash_launch_v3.03.zip (2.41 MB)
NAND Flasher 360 for XBOX 360 v1.2.0.rar (7.56 MB)
SystemUpdate_16197_USB.zip (107.79 MB)
xeBuild_GUI_2.085.rar (26.04 MB)



Code:
You don't have permission to view the code content. Log in or register now.

Code:
You don't have permission to view the code content. Log in or register now.



Special Corona 4GB Instructions


Skip to step 9 if you already have a backup NAND and your CPU key
1. Boot into XeLL (with the console turned off, press the eject button)
2. Copy CPU key down onto notepad (if you are connected via ethernet to your network, simply type in the IP address and then copy the CPU key from there; if you are not, manually copy the code)
3. Download Simple 360 NAND Flasher 1.2
Code:
You don't have permission to view the code content. Log in or register now.
4. Place the Simple 360 NAND Flasher folder on your flash drive (after you extracted it from the download)
5. Launch the default.xex inside the Simple 360 NAND Flasher folder (using xex menu, fsd, etc)
6. Press X to backup the NAND
7. Once complete, if the console does not shut down automatically, power down the console
8. Unplug the flash drive from the xbox and plug into your computer
9. Launch XeBuild GUI 2.0885
10. Click open next to source file and select your flashdmp.bin
11. Click save next to output path and select the root of your flash drive (save as updflash)
12. In the keys section, paste your CPU key
13. At the bottom right of the screen, press check KV (this makes sure the CPU key is correct and will properly build your image)
14. In kernel version, select 2.0.16197 (if not already selected)
15. Double check build type, motherboard, XeLL, and SMC Hack (JTAG ONLY)
16. Press "Generate $acked Image"
17. Plug the flash drive into your console
18. Turn on with power button (DO NOT BOOT INTO XELL)
19. Launch the default.xex inside the Simple 360 NAND Flasher folder (using xex menu, fsd, etc)
20. Press A to flash the image
21. Once completed, let the app turn off the console (You will mess up the console if you do not let it shut off by itself)
22. Unplug your flash drive
23. Power on the Xbox


Congratulations, you have successfully updated to dashboard 16197
chief thx
 
Back
Top