Well i've been bored today and decided to play about with network streaming, and was looking at "Zapstream" plugin that i think is used on PLi images,
it enables you to view stream over network using just the port 31344 and will change channel at same time as Enigma without restarting stream
the only streaming method i could find on UR at the moment was with all the vid aid etc etc in link and has to be restarted evrytime you switch channel.
e.g http://192.168.1.2:31339/0,0113,0913,091b
as zapstream needs an edited inetd.conf, the only way i've found to get this working is manually restarting inetd from telnet and pointing it at the edited cfg.
here's how i got it working, open attached .zip
1- ftp contents overwriting /var/
2- open telnet to box and do chmod 755 /var/sbin/zapstream
*3- in telnet do killall -q inetd
*4- now reload inetd with the edited cfg in telnet inetd /var/etc/inetd.conf
*you'll need to do steps 3 and 4 again if you restart box, unless i can find way to make it auto.
now just open vlc and and point it at port 31344
File > Open Network Stream > HTTP.. then dream.box.i.p:31344
once started if you changed channel there's about 1 to 2 second pause when it changes but you don't have to press anything on vlc.
you can also set audio priority in "zapstream.conf" i've set it to english.
on > audiochannelspriority=
i left in the old streamts method so u can still use that from vlc button in webui.
Edit:
to create a shortcut to watch stream on vlc, open notepad and put
http://192.168.1.2:31344
then saves as a .m3u file
and if anyone knows a way to makes this automatically start with box please post
i think it would just need
killall -q inetd
inetd /var/etc/inetd.conf
to be run at startup... can't seem to find a file for it though, a UR 18 swap guide guides mention a "var/etc/init.d/init" for auto cmd's
p.s
this has only been tested on a TM600.
it enables you to view stream over network using just the port 31344 and will change channel at same time as Enigma without restarting stream
the only streaming method i could find on UR at the moment was with all the vid aid etc etc in link and has to be restarted evrytime you switch channel.
e.g http://192.168.1.2:31339/0,0113,0913,091b
as zapstream needs an edited inetd.conf, the only way i've found to get this working is manually restarting inetd from telnet and pointing it at the edited cfg.
here's how i got it working, open attached .zip
1- ftp contents overwriting /var/
2- open telnet to box and do chmod 755 /var/sbin/zapstream
*3- in telnet do killall -q inetd
*4- now reload inetd with the edited cfg in telnet inetd /var/etc/inetd.conf
*you'll need to do steps 3 and 4 again if you restart box, unless i can find way to make it auto.
now just open vlc and and point it at port 31344
File > Open Network Stream > HTTP.. then dream.box.i.p:31344
once started if you changed channel there's about 1 to 2 second pause when it changes but you don't have to press anything on vlc.
you can also set audio priority in "zapstream.conf" i've set it to english.
on > audiochannelspriority=
i left in the old streamts method so u can still use that from vlc button in webui.
Edit:
to create a shortcut to watch stream on vlc, open notepad and put
http://192.168.1.2:31344
then saves as a .m3u file
and if anyone knows a way to makes this automatically start with box please post
i think it would just need
killall -q inetd
inetd /var/etc/inetd.conf
to be run at startup... can't seem to find a file for it though, a UR 18 swap guide guides mention a "var/etc/init.d/init" for auto cmd's
p.s
this has only been tested on a TM600.
Last edited: