How to recover an ERROR01 : NO CA FOUND - on DM800 (clone)

You did not get my point.

It is supose to hang according to the Sim 201 website!
 
I used a patched dreamup with a fix but i did not save it after it went back to live. I ma trying to find the whole package for you again.
 
Certification Authority not found.
wrong sim answer ... probably must downgrade SSL


I. The onlything a hav´t test is this
1. Connect a working drembox with dreamup.
2. click connect (Dreamup find the working dreambox)
3. Remove serial(Null) Cabel from working dreambox
4. Connect Serial(Null) cabel to dead dm.
5. Power on dead dm
6. Flash.

II. use enforcer

how to use enforcer
1) connect dead box to dreamup, press connect
2) press ok at ca error popup, any error just press ok
3) download enforcer
4) drag enfocer in front om dreamup, press enable in enforcer
5)press flash and chose flash file
6) flash probably hangs
7) connect the broken box to dreamup, press connect and try flash, chose flash file, hopefully it works now


To explain all qestion about file to big!!

1. switch on enforcer press enable
2. Run dream up and press connection
3. Switch on dm800 (should send now BL to box)
4. If dreamup succesfully send BL to box (doing this automaticly when you plug in power cable to box)
5. shout down dream up and enforcer
6. shout down box, switch on dream up (just dream up! press connection)
7. switch on box
8. now when everything goes ok, you are able again to flash box

*special DreamUp & enforcer:

*ttp://rapidshare.com/files/289346941/2nd_stage_pack.rar

Here it is thanks to Selector..

It worked for me!
 
Hello,

thanks but i have tried all the above and have managed as i said before to get the box to show an ip address but thats it i cannot get any futher with the browser or the Dream Up !

SP
 
Daa.. I hear you. I am telling you i had the same. my solution was to just continue. I think we are talking for the same but somehow we are not connecting :p

Here is what I did:

first I used dreamup with the enforcer.

This gave me the poweron with OK button IP number.

I flashed first the loader to 76a. which I mentioned before. then even before a manual reboot I did the poweron with OK button again.
This gave me the IP number again
Then I flashed the nabilo 11 because of the size.

Here it got stuck!! and after another poweron OK I still had the IP number
And I flashed the OPen PLI patched for sim boxes!!!!

Maybe its clear now. and if not I am sorry I can;t help you, I did my best :)

Good luck
 
Still playing up i guess it will have to go back to China after only a week :(
 
Start from scratch and flash serial one more time :)
It takes ages but its the most stable way.
And use this *ttp://rapidshare.com/files/289346941/2nd_stage_pack.rar dream-up

I am sure u arre missing something little.
 
*ttp://rapidshare.com/files/289346941/2nd_stage_pack.rar


this one is. u copied the dreap-up with it.

try again
 
I think i have cracked it :)

32 minutes remaining on dream up fingers crossed X

Will let you know thanks for the help.
 
I have everything crossed and there are still 19 mins to go !!!!!!!
 
Last edited:
yeah haaa image flashed thanks :)

OK next question how do i put the tunisia sat plug in on the DM800 please ?
 
congratulations :D

the tspanel was allready backed in the openplisim201 image.. but i think with the manual install, copy to /tmp and use manual install??? depends on the file you have i guess.
 
Quick installation:
1) Ftp the .ipk file to the /tmp directory of your dreambox
2) Run the command (telnet) "ipkg install /tmp/nameoftheipkfile.ipk"
3) Restart your dreambox.
 
OK i have the file and have gone into DCC, FTP and TEMP file but cannot see the file on the left hand side to transfer accross any ideas why not ?
 
Last edited:
Hi All, nice welcoming site,
I have a cloned DM800, on receiving it it crashed, grees screen,
I have a dm7000 so thought it was probably just wanting a flash, didnt realise i put an official image in & got eh NO CA Error.
Down loaded the 2ndstage pack. Started dream up, stared repair tool, selected an image (second stage dm800 62), img too big displayed.
Press ok, when power up the box i get " integer is too big and it all just sits there.
What am I doing wrong, feel like a right do nut!
Thanks
 
Back
Top