witchy
Banned for good!
- Joined
- Jul 20, 2005
- Messages
- 18,282
- Reaction score
- 334
Very easy.
1. Remove screws from TM800.
2. Remove front panel power cable from motherboard.
3. Remove rubber grommets from antenna sockets on back panel (if fitted).
4. Attach antenna ports to rear sockets using supplied washers and nuts.
5. Position TM800 facing towards you, you will see the area for the WiFi marked on the motherboard.
6. Make sure the MAC address etc is facing towards the front of the receiver.
7. Carefully attach the antenna leads to the WiFi adapter - 1 lead fits onto the bottom and the other on the top surface - it does not matter which one goes where. They snap on quite easily but can be fiddly.
8. Carefully fit the board so that both sets of pins match up with the black pin headers on the motherboard.
9. Reattach front panel power lead.
10. Screw both antennas onto the newly fitted antenna ports.
11. Screw it all back together.
The new 07/07/2010 image does not appear to support the Wifi adapter.
I just reflashed to this build and I've lost all my Wifi settings, oops!
I've just noticed that there is a Beta 08/07/2010, I'll try that.
1. Remove screws from TM800.
2. Remove front panel power cable from motherboard.
3. Remove rubber grommets from antenna sockets on back panel (if fitted).
4. Attach antenna ports to rear sockets using supplied washers and nuts.
5. Position TM800 facing towards you, you will see the area for the WiFi marked on the motherboard.
6. Make sure the MAC address etc is facing towards the front of the receiver.
7. Carefully attach the antenna leads to the WiFi adapter - 1 lead fits onto the bottom and the other on the top surface - it does not matter which one goes where. They snap on quite easily but can be fiddly.
8. Carefully fit the board so that both sets of pins match up with the black pin headers on the motherboard.
9. Reattach front panel power lead.
10. Screw both antennas onto the newly fitted antenna ports.
11. Screw it all back together.
The new 07/07/2010 image does not appear to support the Wifi adapter.
I just reflashed to this build and I've lost all my Wifi settings, oops!
I've just noticed that there is a Beta 08/07/2010, I'll try that.
Last edited: