L
LincCracker3
Guest
hi folks
i have a pre update home 200 that was running a 120 mac till a couple of days ago . with all the talk of forced updates i thought i'd connect up my max232 and have a look around on it and i found a setting to turn off software provisioned upgrades as specified in config file after doing this and looking at log again it does not show any sign of d/l of incompatable image
so i thought i'd put a 200 mac back on it to see if it would take the update and it's been on for two and a half days and still no NTSMELL logo or flashing lights
also found a few commands for changing the serial numbers for those of you who still believe they can have something to do with update
here is what i typed and yes it is ALL CASE SENSITIVE
cd non-vol
cd snmp
docsDevSwAdminStatus 3
write
cd \
reset
also for those that think ntl look for serial numbers
cd non-vol
cd vendor
serialno **:**:**:**:**:** (PUT YOUR MAC ADDY IN HERE)
write
cd \
reset
cd non-vol
cd snmp
docsDevSerialNumber **:**:**:**:**:** (PUT YOUR MAC ADDY IN HERE)
write
cd \
reset
try it all at your own risk and don't blame me if it doesn't work on yours cos it has on mine
i have a pre update home 200 that was running a 120 mac till a couple of days ago . with all the talk of forced updates i thought i'd connect up my max232 and have a look around on it and i found a setting to turn off software provisioned upgrades as specified in config file after doing this and looking at log again it does not show any sign of d/l of incompatable image
so i thought i'd put a 200 mac back on it to see if it would take the update and it's been on for two and a half days and still no NTSMELL logo or flashing lights
also found a few commands for changing the serial numbers for those of you who still believe they can have something to do with update
here is what i typed and yes it is ALL CASE SENSITIVE
cd non-vol
cd snmp
docsDevSwAdminStatus 3
write
cd \
reset
also for those that think ntl look for serial numbers
cd non-vol
cd vendor
serialno **:**:**:**:**:** (PUT YOUR MAC ADDY IN HERE)
write
cd \
reset
cd non-vol
cd snmp
docsDevSerialNumber **:**:**:**:**:** (PUT YOUR MAC ADDY IN HERE)
write
cd \
reset
try it all at your own risk and don't blame me if it doesn't work on yours cos it has on mine