this is for the Oscam update.HI Ferret,
When you open the file it is in Binary code, but it is a .ipk file. would i still use this command in telenet? "opkg update && opkg install /tmp/*.ipk"
this is for the Oscam update.HI Ferret,
When you open the file it is in Binary code, but it is a .ipk file. would i still use this command in telenet? "opkg update && opkg install /tmp/*.ipk"
The file you posted here was just the IPK install file it did not include anything that would open any channels, you have this installed you have shown us the pic of it running there is no more to do there. Its your oscam configs that need tested by someone this is second nature to hence why i offered. This way we would know the fault is at your end and not the servers end or a problem in your configs.this is for the Oscam update.
Thanks Ferret,The file you posted here was just the IPK install file it did not include anything that would open any channels, you have this installed you have shown us the pic of it running there is no more to do there. Its your oscam configs that need tested by someone this is second nature to hence why i offered. This way we would know the fault is at your end and not the servers end or a problem in your configs.
You must have an attach button in the private message of ours when you type a replyThanks Ferret,
There is a lot of stuff l struggle with. I am trying to send files, but dont have the attach files button. It is here now in this thread as l see it now, but l am not supposed to send them here.
You don't have permission to view the code content. Log in or register now.
I'd not bother with a factory reset id just reflash it and start from scratch.Thanks Abu,
I will persevere, l have contacted my provider and asked them to check the files. There are a few things l can try. Factory reset on the reciever, and just start again.
Yes,I'd not bother with a factory reset id just reflash it and start from scratch.
Need to setup a password now to be able to ftpYes,
I cant connect to my pc now, the reciever is not being detected all of a sudden! Looked at network settings in my receiver and did a network test which was fine. Did a restart network, and that has frozen. So something not right.
Paul i am busy until later but do you want me to teamviewer into the box and help. I have done it hundreds of times for members on here and on another forum i am well known on.I have done that one already, it was a few months ago though. Is this something we have to keep redoing?
You can flash via USB though there is no need to flash online if you carnt.Yes,
I cant connect to my pc now, the reciever is not being detected all of a sudden! Looked at network settings in my receiver and did a network test which was fine. Did a restart network, and that has frozen. So something not right.
Thanks for the offer, but at the moment the box is not connecting to my pc.Paul i am busy until later but do you want me to teamviewer into the box and help. I have done it hundreds of times for members on here and on another forum i am well known on.
You have just reflashed it paul so reset the password in network as beforeThanks for the offer, but at the moment the box is not connecting to my pc.
Setup the basics of the image then the passwordThanks for the offer, but at the moment the box is not connecting to my pc.
We use essential cookies to make this site work, and optional cookies to enhance your experience.