hi guys can not do it

john22

Inactive User
Joined
Feb 15, 2007
Messages
262
Reaction score
0
Location
Manchester
Hi Guys Can't Do It

help
i all i have done what it says in the ambit 250 tut put
it his so had i got the firmware on the modem put when i came down to this bite
Code:
cd \non
cd doc
dhcp_settings
My IP Address: [192.168.100.1]
Subnet Mask: [255.255.255.0]
Router IP Address: [192.168.100.254]

all i got was erros
sorry for my spelling as i am not good at it
can you help plz
 
Last edited:
wot errors are u getting and have you set your network card back to being a DHCP client...you aint far off because if u have got that far you have flashed the firmware and u just need to to add the mac addy and config file
 
Thats the stage to force a config file.
Try skipping that bit and connecting your modem.
You should just end up with the correct config file for the MAC addy your using...
 
help
i all i have done what it says in the ambit 250 tut put
it his so had i got the firmware on the modem put when i came down to this bite
Code:
cd \non
cd doc
dhcp_settings
My IP Address: [192.168.100.1]
Subnet Mask: [255.255.255.0]
Router IP Address: [192.168.100.254]

all i got was erros
sorry for my spelling as i am not good at it
can you help plz
hi m8 use the 250 mac configurator for that stage its ezer to put ur mac and config file and dont forget ur going to need ur tftp sever ip address.
 
thank to you guys helping me
do i copy all this in one go
Code:
cd \non
cd doc
dhcp_settings
My IP Address: [192.168.100.1]
Subnet Mask: [255.255.255.0]
Router IP Address: [192.168.100.254]

or do i put it like this one at a time

Code:

cd \non [enter]

cd doc [enter]

dhcp_settings [enter]

My IP Address: [192.168.100.1] [enter] is this ip ok or do i put someing here

Subnet Mask: [255.255.255.0] [enter] is this ok or do i put someing here

Router IP Address: [192.168.100.254] [enter] is this ok or do i put someing here

it doing my head it now can some one send me a pic how they did it plz
how they did there modem
 
just press enter after each line...you are just accepting the default settings, then it takes you further and u then have to put your tftp server adress in..u will get this info using ipconfig/all comand with ure subbed modem attached, then u add your chosen config file and then write it to the modem....as it says in the tut
 
hi m8 copy and paste this in 1st
Code:
cd \non
cd doc
dhcp_settings
My IP Address: [192.168.100.1]
Subnet Mask: [255.255.255.0]
Router IP Address: [192.168.100.254]

then u will see this

Those are the only 3 that really need to be changed.
Do you want to change the other settings? [no] Y press y then press enter
TFTP Server IP Address: [10.10.10.254] make sure u put ur tftp server ip address here then prss enter
Config file name: [cm.bin] copy and paste this config file cmreg-ntlhm250-bund03.cm then press enter
Time Server IP Address: [10.10.10.254] press enter
SysLog Server IP Address: [10.10.10.254] press enter

then copy and paste this


Code:
enable force_cfgfile true
write

then press enter and ur done
 
Last edited:
i think he will have trouble with the tftp address......we'll just have to wait for his next response...fingers crossed for him/she or both LOL:FRIGHT:
hi m8 copy and paste this in 1st
Code:
cd \non
cd doc
dhcp_settings
My IP Address: [192.168.100.1]
Subnet Mask: [255.255.255.0]
Router IP Address: [192.168.100.254]

then u will see this

Those are the only 3 that really need to be changed.
Do you want to change the other settings? [no] Y press y then press enter
TFTP Server IP Address: [10.10.10.254] make sure u put ur tftp server ip address here then prss enter
Config file name: [cm.bin] copy and paste this config file cmreg-ntlhm250-bund03.cm then press enter
Time Server IP Address: [10.10.10.254] press enter
SysLog Server IP Address: [10.10.10.254] press enter

then copy and paste this


Code:
enable force_cfgfile true
write

then press enter and ur done
 
Back
Top