Help with setting the Pot on the Tiny Unlooper.

morashid679

Inactive User
Joined
Jan 8, 2008
Messages
770
Reaction score
85
Location
Herts where my home is.
I tried to re-set my unlooper to a new VCC setting and now all I'm getting is a reading of floor to ceiling of zeros.

I have re-flashed it to see if that helps but nothing.

Has anyone else come across this problem.

I turned the screw anti clockwise tilll it clicks then turned it 1 turn at a time to see what reading I get but all I get is the reading below.



TX Data : 02 03 00
TX Data : 02 02 00
TX Data : 07 0E 03 10 01 03 9A 00
RX Data : 06 00
TX Data : 12 15 AB 21 00 08 A0 CA 00 00 02 12 00 06 55 0E
03 8B 00
RX Data : 11 00

VCC 20: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1F: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1E: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1D: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1C: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1B: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1A: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 19: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 18: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 17: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 16: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 15: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 14: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 13: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 12: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 11: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 10: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0F: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0E: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0D: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0C: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0B: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0A: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 09: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 08: XXXXXXXXXXXX 6F = 0% FF = 0%

VCC Ceiling: 00
VCC Floor..: 00
 

Lance

Inactive User
Joined
Mar 18, 2005
Messages
1,030
Reaction score
0
Location
C/w Underground Liar
I tried to re-set my unlooper to a new VCC setting and now all I'm getting is a reading of floor to ceiling of zeros.

I have re-flashed it to see if that helps but nothing.

Has anyone else come across this problem.

I turned the screw anti clockwise tilll it clicks then turned it 1 turn at a time to see what reading I get but all I get is the reading below.



TX Data : 02 03 00
TX Data : 02 02 00
TX Data : 07 0E 03 10 01 03 9A 00
RX Data : 06 00
TX Data : 12 15 AB 21 00 08 A0 CA 00 00 02 12 00 06 55 0E
03 8B 00
RX Data : 11 00

VCC 20: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1F: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1E: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1D: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1C: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1B: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 1A: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 19: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 18: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 17: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 16: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 15: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 14: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 13: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 12: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 11: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 10: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0F: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0E: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0D: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0C: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0B: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 0A: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 09: XXXXXXXXXXXX 6F = 0% FF = 0%
VCC 08: XXXXXXXXXXXX 6F = 0% FF = 0%

VCC Ceiling: 00
VCC Floor..: 00

You may well have damaged the pot if you heard a click.When ajusting the pot you have to move it in very small amounts.
Try sending pm to Atmelace, he maybe able to give you abit more advice on how to sort the problem.
 

morashid679

Inactive User
Joined
Jan 8, 2008
Messages
770
Reaction score
85
Location
Herts where my home is.
You may well have damaged the pot if you heard a click.When ajusting the pot you have to move it in very small amounts.
Try sending pm to Atmelace, he maybe able to give you abit more advice on how to sort the problem.


I was advised by atmelace to turn the pot till it clicks and turn it back slowly when reaching that point to get
your desired setting for the relevant rom card.
 

dont do it it"ll hurt

VIP Member
VIP Member
Joined
Nov 16, 2006
Messages
8,303
Reaction score
1,118
Location
in a house
your welcome m8
lance is not totally wrong tho if you keep turning and hear it click it will probably fook it m8
 

AtmelAce

Inactive User
Joined
Dec 8, 2004
Messages
793
Reaction score
5
Location
Farnborough
Turning the pot to the end stops won't hurt at all. Go fully clockwise till it clicks, then go back 4 full turns,this will get you into the 'ball park'. You will still need further adjustment for each card you do, but you won't be far out. Near the end stops, nothing is going to work!
Most problems are down to wrong com cable ( must be EXTENSION cable NOT null modem) or the INI settings are wrong.
 
TEST
Top