Hiya,sounds like you have uploaded a bad firmware update,first you can try this,switch off at the rear,then,while pressing the select button at the front,power up,try same again,but next time,keep the menu button pressed,if after trying that vstill nothing,you will have to try connecting direct to your pc like this
Download the relevent patch and extract.
Download the relevent loader and extract.
Connect your receiver to the pc via rs232c cable.
Choose the correct com port.
Leave the receiver on standby.
Open the loader and select the software tab.
Press browse and find the extracted patch.
Press ok then start then wait
i have attached the relevant loader and official TM6900 firmware,if that doesn't do it,then you will have to return to Technomate,hope that helps
try this its boot software but you must use NULL modem cable I"ve never had to use it so dont know if it works but you have nothing to lose if you box is frozen anyway.
Download the relevent patch and extract.
Download the relevent loader and extract.(Use darkmanloader)
Connect your receiver to the pc via rs232c cable.
Choose the correct com port.
Leave the receiver OFF this is very important !!!!!
Open the loader and select the software tab.
Press browse and find the extracted patch.
Press ok then start then wait, it will be in connect mode
NOW YOU TURN ON YOUR RECEIVER.
THE loader software will pick up the bootsignal and will upload the firmware !
Do it like this and it will work...
had the same problem after bad phanton patch- ie do display box dead just blueDoes anyone know what CPU uses non super technomate 6900 hd??
I searched on google and it seems that using the STI 7100 processor, but not sure.
I want to try to rewrite the flash with JTAG processor found in Technomate 6900 non Super HD.
Thanks.
We use essential cookies to make this site work, and optional cookies to enhance your experience.