Help Please.

yamaha-r1

Inactive User
Joined
Mar 19, 2005
Messages
70
Reaction score
0
anyone know if the new ntl 250 modem can be cloned.
 

yamaha-r1

Inactive User
Joined
Mar 19, 2005
Messages
70
Reaction score
0
i can connect to it ok.and get to the menu.this is what i get.

Main Menu:
==========
d) Download and save to flash
g) Download and run from RAM
c) Store icePROM bootloader to flash
b) Boot from flash
e) Erase flash sector
m) Set mode
s) Store bootloader parameters to flash
i) Re-init ethernet
r) Read memory
w) Write memory
 
C

cableguy69

Guest
The problem is the mac is stored in several places on the modem and the modem has, similar Firmware to that of the updated 100, 120 & 200 modems which wont allow you to change the mac via the normal methods.
 

crackerchalk

Inactive User
Joined
Aug 16, 2005
Messages
1,931
Reaction score
42
Location
Berks Pure NTHell
Hi:BLOBBY:
I had a 250 like yours so check out my findings
:BLOBBY: http://www.world-of-digital.com/forums/showthread.php?t=59077
note my mistake as well mine dont boot up now
One question 4 all You brains
I have a 200 modem with the same or similar flash
i.e Im getting the same thing again on 2 different modens
This would surely mean that
a 200 dump could be willemed to a 250 modem then cloned
heres the text from the 200 that i have which aint been in feed
well since i got it
:Smileysex :Smileysex :Smileysex
Detected CPU .............. BCM3348A1
Ebi Initialized .....................000002020000001C
Sdram Initialized....................
Icache Size: ....................2000
Icache Linesize:.................0010
Dcache Size: ....................2000
Dcache Linesize:.................0010
Sdram access OK......................
Compressed Bootloader detected.......
ImageCSize: ...................007666
ImageLoc: ...................81F80000
Decompression Status: .......00000000
Dcompressed Image Size:......00014995
BSS Initialized......................
TMP Stack initialized................
Perm Stack initialized...............
MemSize: ......................... 8M
Flash detected @0xbe000000
Signature: 3348
Broadcom BootLoader Version: 3.13.2
Build Date: Dec 28 2002
Build Time: 12:22:36
Image 1 Program Header:
Signature: 3348
Control: 0000
Major Rev: 0002
Minor Rev: 0000
Build Time: 2003/7/16 09:12:24 Z
File Length: 906823 bytes
Load Address: 80010000
Filename: vxram_sto.bin
HCS: 3639
CRC
Image 2 Program Header:
Signature: 3348
Control: 0000
Major Rev: 0002
Minor Rev: 0000
Build Time: 2003/7/16 09:12:24 Z
File Length: 906823 bytes
Load Address: 80010000
Filename: vxram_sto.bin
HCS: 3639
CRC: 69db5de2
Enter '1', '2', or 'p' within 2 seconds or take default...
.
:) Pressed p here:)
Board IP Address [192.168.100.1]:
Board IP Mask [255.255.255.0]:
Board IP Gateway [0.0.0.0]:
Board MAC Address [00:00:00:00:00:00]:
Internal/External phy? (i/e)
Init EMAC, DMA, and MII PHY...
Autonegotiation started, waiting for completion...ERROR: Autonegotiation timeout
...
MAC setup for HalfDuplex
Main Menu:
==========
d) Download and save to flash
g) Download and run from RAM
c) Store icePROM bootloader to flash
b) Boot from flash
e) Erase flash sector
m) Set mode
s) Store bootloader parameters to flash
i) Re-init ethernet
r) Read memory
w) Write memory
 
TEST
Top