cablekiller
Inactive User
- Joined
- Jul 29, 2005
- Messages
- 1
- Reaction score
- 0
Hi
I HAve a Wildthing Modded for nagra unlooper, and a mrmp1.4 prerelease (unfinished)dev4works(0) winexplorer script.
Testing in a ROM11 B0C prov 4801 i have this error
Script version 1.4c - experimental prototype - not for general release
Work still to be done before release
------------------------------------
1. Add BD key correction or display
Do NOT remove card while script is running!!!
Card is a Rom 11 RevB0C (4801)
Checking card status..........
Card is locked................
Card logged in successfully...
Please wait while we do our stuff....(this could take a while)
Now we will try Packet 1, 16FF delay, our VCC is about 6D and our Glitch Type was 08
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
VCC is negative - please check your glitcher - exiting script
script failed
I just tried change vcc to 6f and limit to 30, but still have the same error.
Can help-me on this.
Best regards
Cablekiller
I HAve a Wildthing Modded for nagra unlooper, and a mrmp1.4 prerelease (unfinished)dev4works(0) winexplorer script.
Testing in a ROM11 B0C prov 4801 i have this error
Script version 1.4c - experimental prototype - not for general release
Work still to be done before release
------------------------------------
1. Add BD key correction or display
Do NOT remove card while script is running!!!
Card is a Rom 11 RevB0C (4801)
Checking card status..........
Card is locked................
Card logged in successfully...
Please wait while we do our stuff....(this could take a while)
Now we will try Packet 1, 16FF delay, our VCC is about 6D and our Glitch Type was 08
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
VCC is negative - please check your glitcher - exiting script
script failed
I just tried change vcc to 6f and limit to 30, but still have the same error.
Can help-me on this.
Best regards
Cablekiller