help needed please

dabs

Inactive User
Joined
Feb 1, 2005
Messages
603
Reaction score
0
hi all
have a couple of rom 11's 1 is boc the other bo8, am really confused as to how to unlock these cards, want to get rid of fun's bought 1 off flea bay and programed fine. have tried search but seem to go round and round with all the differeant ways to unlock. i know i will not be able to handle a t911 am strugling as it is. is there a way to unlock these or anyone that fancies a unlocking them for me would be great, otherwise i'm back to flea bay to buy some unlocked cards
thanks in advance for you help
i have a infinity usb writter, both boxes are 4001
am totally lost now
 
dabs said:
hi all
have a couple of rom 11's 1 is boc the other bo8, am really confused as to how to unlock these cards, want to get rid of fun's bought 1 off flea bay and programed fine. have tried search but seem to go round and round with all the differeant ways to unlock. i know i will not be able to handle a t911 am strugling as it is. is there a way to unlock these or anyone that fancies a unlocking them for me would be great, otherwise i'm back to flea bay to buy some unlocked cards
thanks in advance for you help
i have a infinity usb writter, both boxes are 4001
am totally lost now

hi m8 you can unlock the b08 card with XNCS but the boc cards you will need a t911
 
hi jase

tried that program all i got was 'no atr string from card'
meant to put that in my first part but forgot
 
that card is prob fooked m8 the one with no atr string from card have you tryed reading in nagra
 
yes tried nagra 4.1
Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 38 40
ROM Revision: 011
EEPROM Revision: RevB08
ProviderID: 54
CamID: 24 72 31 DD
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
Error, BackDoor reported disable - Card may contain update
Reading ROM11 failed
Closing of COM1 was successful
came back with that
 
no it looks ok m8 dont know why XNCS is giveing you no atr string. they will all unlock with a t911
 
am strugling to get this far, have not got a t911 and know i will not be able to use it, read the tuts on them and am totally confused and lost by them, ah well looks like flea bay to get unlocked ones
 
Configure XNCS properly and you should be able to open a EEPROM Revision: RevB08 card

Re- install if you have to"!

Here is a how to :
 
carwash
got as far as do you want to install a ghost, and thought yipee clicked yes then came back with error
ATR=3FFF9500FF918171A04700444E4153503031312052657642303840
Info=DNASP011 RevB08
Retrieving card info...
Card info retrieved :)
Installing ghost provider...
1.Dumping dataspace...
Error dumping dataspace...
Error Installing Ghost...
 
did you unlock the card first by clikin on the yellow triangle you need to read the attached file what carwash has posted m8
 
yes unlocked it then it asked if i wanted to install a ghost on it then the above came up
 
ok just rebooted and tried it again now getting
Opening of port was sucessfull.
ATR=3FFF9500FF918171A04700444E4153503031312052657642303840
Info=DNASP011 RevB08
Retrieving card info...
Card info retrieved :)
--------------------------------------------------------------------
1) Calibration is: 2200.07645768934 Mhz , Acc:5,Use Tsc:Yes
2) Building Bug Table...
2) Using Simple Send method!
3) Encrypting Ecm...
--------------------------------------------------------------------
Something is not going Right(Check DTs ...) @ time:157000 Rx:1200010013
now totally lost
 
change to 275000 running now will let you know what happens fingers crossed
 
showing this
Opening of port was sucessfull.
ATR=3FFF9500FF918171A04700444E4153503031312052657642303840
Info=DNASP011 RevB08
Retrieving card info...
Card info retrieved :)
--------------------------------------------------------------------
1) Calibration is: 2200.07763441074 Mhz , Acc:5,Use Tsc:Yes
2) Building Bug Table...
2) Using Simple Send method!
3) Encrypting Ecm...
--------------------------------------------------------------------
Found the Delay for 1000 @ Time:296000
Found the Delay for 100 @ Time:296300
Found the Delay for 10 @ Time:296260
4) Now Working - Dont Interrupt!
--------------------------------------------------------------------
and attemts going up one at a time is this right
 
it all froze up rebooted started again from scratch now get
Opening of port was sucessfull.
ATR=3FFF9500FF918171A04700444E4153503031312052657642303840
Info=DNASP011 RevB08
Retrieving card info...
Card info retrieved :)
--------------------------------------------------------------------
1) Calibration is: 2200.07836288084 Mhz , Acc:5,Use Tsc:Yes
2) Building Bug Table...
2) Using Simple Send method!
3) Encrypting Ecm...
--------------------------------------------------------------------
attempt number at the bottom not changing now at all
 
Keep trying "! also keep reading because sometimes it dont tell you it's open"! but when you read it dumps
 
i am tring this and its coming up privalidged instruction

any idea what the problem is?
 
carwash is there any way of knowing or a set time to let it run
sorry to be a pain thanks
 
ok think its unlocked opened with nagra 4.1
got this
Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 38 40
ROM Revision: 011
EEPROM Revision: RevB08
ProviderID: 54
CamID: 24 72 31 DD
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Backdoor retrieval has been blocked
Attempting to login to BD3
Attempting to login to BD0
Unable to login, bad password detected
tried all the 8's didn't work is there another password? or way in
 
Back
Top