Help needed please guys.

benj

Member +
Joined
Mar 20, 2007
Messages
150
Reaction score
3
I#ve taken delivery of a Minimus AVR USB 32K and whatever I flash it with I can't get it to work.

My key appeasrs as ATMEGA32U2 and not as AT90USB.

All of the Hex's I load have the same issue. No "Back Up Manager" appears and I get the error code "80028F14" when I try select teh "apps....PS3_GAME" folder.

AM I using the wrong Hex's???

TIA

MrB
 

stellarocksme

DW Regular
Joined
Jun 6, 2005
Messages
1,139
Reaction score
60
Location
on here
I#ve taken delivery of a Minimus AVR USB 32K and whatever I flash it with I can't get it to work.

My key appeasrs as ATMEGA32U2 and not as AT90USB.

All of the Hex's I load have the same issue. No "Back Up Manager" appears and I get the error code "80028F14" when I try select teh "apps....PS3_GAME" folder.

AM I using the wrong Hex's???

TIA

MrB

Look here mate https://www.digitalworldz.co.uk/index.php?threads/247451/ , also you need backup manager on the USB Drive, have you Powered the PS3 off completely before putting it in ? And your on f/w 3.41 yeah ?

As for the Hex you need to program it with Minimus_16Mhz.hex, all the info is here mate.

Mine still not turned up, but im sure i right in what im saying, if not please correct me.
 
Last edited by a moderator:

dave24

VIP Member
VIP Member
Joined
Dec 24, 2005
Messages
3,322
Reaction score
736
Location
East Midlands
Use the AVRKEY hex file out of the PSGroove V3 Hermes+Waninkoko+Mathieulh (FIX) pack , as its for the ATMEGA32U2
I#ve taken delivery of a Minimus AVR USB 32K and whatever I flash it with I can't get it to work.

My key appeasrs as ATMEGA32U2 and not as AT90USB.

All of the Hex's I load have the same issue. No "Back Up Manager" appears and I get the error code "80028F14" when I try select teh "apps....PS3_GAME" folder.

AM I using the wrong Hex's???

TIA

MrB
 

stellarocksme

DW Regular
Joined
Jun 6, 2005
Messages
1,139
Reaction score
60
Location
on here
Will the Minimus one not work m8, i dunno mine not come yet but i brought the same one and was going to flash it with.

minimus_with_hermesv3_and_mathieulh_waninkoko_payloads_v2_working_led

Thanks m8

:Clap:
 

dave24

VIP Member
VIP Member
Joined
Dec 24, 2005
Messages
3,322
Reaction score
736
Location
East Midlands
I think the minimus 1 is for the AT90USB162 and the AVR 1 is for the ATmega32U2
Will the Minimus one not work m8, i dunno mine not come yet but i brought the same one and was going to flash it with.

minimus_with_hermesv3_and_mathieulh_waninkoko_payloads_v2_working_led

Thanks m8

:Clap:
 

stellarocksme

DW Regular
Joined
Jun 6, 2005
Messages
1,139
Reaction score
60
Location
on here
Mmmmmm confused.com, here's what the seller said in the description mate,

Note: The Minimus 32 AVR USB uses a larger Atmel 32k controller than the Minimus AVR USB so you will need to run at least Atmel Flip v3.4.2 and all codes must be compiled as ATMEGA32U2

Thanks.
 

dave24

VIP Member
VIP Member
Joined
Dec 24, 2005
Messages
3,322
Reaction score
736
Location
East Midlands
Use the AVR hex file then m8.
Mmmmmm confused.com, here's what the seller said in the description mate,

Note: The Minimus 32 AVR USB uses a larger Atmel 32k controller than the Minimus AVR USB so you will need to run at least Atmel Flip v3.4.2 and all codes must be compiled as ATMEGA32U2

Thanks.
 

benj

Member +
Joined
Mar 20, 2007
Messages
150
Reaction score
3
Thanks for the help guys. Will use that Hex and report back.

B
 

benj

Member +
Joined
Mar 20, 2007
Messages
150
Reaction score
3
Will report back tomorrow guys - not been able to get near the telly tonight due to bloody x factor
 

benj

Member +
Joined
Mar 20, 2007
Messages
150
Reaction score
3
Works a charm guys.

Used the AVR Hex file. Thanks so much for your help.

B
 

sargie

VIP Member
VIP Member
Joined
Nov 9, 2005
Messages
8,840
Reaction score
475
Location
In limbo!
Minimus at90usb162

The Minimus AVR USB is powered by an Atmel AT90USB162 that is pre-programmed with the bootloader which allows code to be programmed inside the chip without any external programmer, just download the FLIP software from Atmel's web site and load your HEX code. To enter the bootloader mode you should simply press and hold HWB button, then press and release the RST button.

•ATMEL AT90USB162
•22 Programmable I/O Lines
•16Kbyte Flash
•512 Byte SRAM
•512 byte EEPROM
•16 MIPS Throughput

•USB 2.0 High Speed
•5V USB Powered

•16MHz Quartz Crystal Oscillator Circuit
•Power / Status LED's
•Male USB Connector - No Cable Required
•Access to all IO's
•Easy Program / Update with Atmel FLIP (Flexible In-system Programmer)
•Robust HW/Reset Buttons (Simple Once-Only Operation When Programming)

•Full LUFA Compatability
•Full LibUSB Compatability
•Simple Plug n Play
•Atmel FLIP Software Drivers: Atmel Products - AVR Solutions - FLIP
•Software Compatible With Windows 9x / Me / NT / 2000 / XP / Vista / 7 and Linux.
•High Quality production quality at the famous Xecuter factory.

Minimus 32 avr usb.

The Minimus 32 AVR USB is powered by an Atmel ATMEGA32U2 that is pre-programmed with the bootloader which allows code to be programmed inside the chip without any external programmer, just download the FLIP software from Atmel's web site and load your HEX code. To enter the bootloader mode you should simply press and hold HWB button, then press and release the RST button.

•ATMEL ATMEGA32U2
•22 Programmable I/O Lines
•32Kbyte Flash
•1024 Byte SRAM
•1024 byte EEPROM
•16 MIPS Throughput

•USB 2.0 High Speed
•5V USB Powered

•16MHz Quartz Crystal Oscillator Circuit
•3 x Power / Status LED's
•Male USB Connector - No Cable Required
•Access to all IO's
•Easy Program / Update with Atmel FLIP (Flexible In-system Programmer)
•Robust HW/Reset Buttons (Simple Once-Only Operation When Programming)

•Full LUFA Compatability
•Full LibUSB Compatability
•Simple Plug n Play
•Atmel FLIP Software Drivers: Atmel Products - AVR Solutions - FLIP
•Software Compatible With Windows 9x / Me / NT / 2000 / XP / Vista / 7 and Linux.
•High Quality production quality at the famous Xecuter factory.
•If you have x64 driver problems use these - http://www.minimususb.com/minimus_x64_drivers.rar

The only difference i can see is the increase in memory on the 32 chip, but the hex's must have to be compiled differently.

I have been able to flash an avr usb key hex to my minimus at90usb162, and i can flash the 16mhz minimus hex's so they both work on mine but only the minimus hex makes the led's work correctly.
 
Last edited:

dave24

VIP Member
VIP Member
Joined
Dec 24, 2005
Messages
3,322
Reaction score
736
Location
East Midlands
Different chips sargie , one uses the AT90USB162 and the other uses the ATMEGA32U2
Minimus at90usb162

The Minimus AVR USB is powered by an Atmel AT90USB162 that is pre-programmed with the bootloader which allows code to be programmed inside the chip without any external programmer, just download the FLIP software from Atmel's web site and load your HEX code. To enter the bootloader mode you should simply press and hold HWB button, then press and release the RST button.

•ATMEL AT90USB162
•22 Programmable I/O Lines
•16Kbyte Flash
•512 Byte SRAM
•512 byte EEPROM
•16 MIPS Throughput

•USB 2.0 High Speed
•5V USB Powered

•16MHz Quartz Crystal Oscillator Circuit
•Power / Status LED's
•Male USB Connector - No Cable Required
•Access to all IO's
•Easy Program / Update with Atmel FLIP (Flexible In-system Programmer)
•Robust HW/Reset Buttons (Simple Once-Only Operation When Programming)

•Full LUFA Compatability
•Full LibUSB Compatability
•Simple Plug n Play
•Atmel FLIP Software Drivers: Atmel Products - AVR Solutions - FLIP
•Software Compatible With Windows 9x / Me / NT / 2000 / XP / Vista / 7 and Linux.
•High Quality production quality at the famous Xecuter factory.

Minimus 32 avr usb.

The Minimus 32 AVR USB is powered by an Atmel ATMEGA32U2 that is pre-programmed with the bootloader which allows code to be programmed inside the chip without any external programmer, just download the FLIP software from Atmel's web site and load your HEX code. To enter the bootloader mode you should simply press and hold HWB button, then press and release the RST button.

•ATMEL ATMEGA32U2
•22 Programmable I/O Lines
•32Kbyte Flash
•1024 Byte SRAM
•1024 byte EEPROM
•16 MIPS Throughput

•USB 2.0 High Speed
•5V USB Powered

•16MHz Quartz Crystal Oscillator Circuit
•3 x Power / Status LED's
•Male USB Connector - No Cable Required
•Access to all IO's
•Easy Program / Update with Atmel FLIP (Flexible In-system Programmer)
•Robust HW/Reset Buttons (Simple Once-Only Operation When Programming)

•Full LUFA Compatability
•Full LibUSB Compatability
•Simple Plug n Play
•Atmel FLIP Software Drivers: Atmel Products - AVR Solutions - FLIP
•Software Compatible With Windows 9x / Me / NT / 2000 / XP / Vista / 7 and Linux.
•High Quality production quality at the famous Xecuter factory.
•If you have x64 driver problems use these - http://www.minimususb.com/minimus_x64_drivers.rar

The only difference i can see is the increase in memory on the 32 chip, but the hex's must have to be compiled differently.

I have been able to flash an avr usb key hex to my minimus at90usb162, and i can flash the 16mhz minimus hex's so they both work on mine but only the minimus hex makes the led's work correctly.
 
TEST
Top