got second 5100i up

[666]

got second 5100 up so this is a little update.....before you stick stigma on your modem,i found it a lot better to get a working mac,,first get blackcat cable and start schwarzekatze goto the 5100 tab,now put your mac in the 2 lines like so 12:34:45:67:89:12..but on the secound line the last digit must be 1 number or letter up (eg) if the last digits 98 or ab you would change it to 99 or ac hope it helps people

 

[alvinder1]

error

my software(blackcat) keeps tellin me to try reinstallin software.... dont suppose u could point me to the software that works?

 

[666]

what software r u useing i got stigma http://www.world-of-digital.com/forums/showthread.php?t=63416 just read the tut

 

[name750]

thanks for that.
I'll probably forget and have to work it out by myself.
I'm wait impatiently for my blackcat lite.
I read somewhere about going into your bios and setting your parallel port to emc something???
It's the opposite to what you do with a willem!
Another bloody thing i got to remeber!
The software don't work.
I think it needs to be an iso. I.e an image of the original cd.
I'll do it when i get the cd,but only after i've played with it first.
so tell me. You just put the config file in and bosh!
10MB !!!
That's to good to be true!

 

[name750]

thanks for that.
I'll probably forget and have to work it out by myself.
I'm wait impatiently for my blackcat lite.
I read somewhere about going into your bios and setting your parallel port to emc something???
It's the opposite to what you do with a willem!
Another bloody thing i got to remeber!
The software don't work.
I think it needs to be an iso. I.e an image of the original cd.
I'll do it when i get the cd,but only after i've played with it first.
so tell me. You just put the config file in and bosh!
10MB !!!
That's to good to be true!

 

[666]

yes when you put stigma in and goto the stigma page just put config and tcfp and press change on the next config boot up and thats it

 

[alvinder1]

problems

i keep getting fatal loading error
blackcat engine has failed to initialize, please reinstall from cd
i keep gettin this error even with the 120 version on 2 computers .... what am i doing different?

 

[666]

if you downloaded them from here you need the oringle these are only updates

 

[alvinder1]

original

i have a version of the original but i think it might be corrupt
can someone please post this software (i.e. the original disk in iso format) on bittorent as makin the lead is not a problem
if anyone posts it please log it under blackcat

 

[666]

tell me how to maks a 1so image and i will

 

[name750]

Dude you don't know how to make an iso.
I thought you prob were'nt allowed to copy the disk directly.
Look for software called alcohol 120%
It might have some protection on it but there will be other was around that.
It's a while since i did it but basically you will copy disk image.
i.e an exact duplicate of the cd you have and then that can be burned on a cd.
It will be the same as the one from tcniso.
I felt to much of a ponce to go around asking can you send me the cd so i ordered the blackcat light.
That the first software i've actually paid for in about 5 years!!
Man it hurt.
And as for the geezer saying he has got the original and it must be corrupt some how???
If my cd is knackered then i would'nt be tryiing to get it from here.
I'd be asking tcniso for another one!
Let me know if you run into trouble doing the cd i'll try and help.