Getting Err4 on the screen

Ish

Inactive User
Joined
Mar 8, 2005
Messages
151
Reaction score
0
Hi m8

I am in Ex C&W Area and have DI4000-N box with opos card.
I just programmed this card with new files.

When I started, box come on and got all the channels working. Then after few minutes, I started to changed channels with remote control. After few channel box got stucked at one channel. I then switch off the box and restarted the box again. Now box start, but not get any channels and get message Err2 on the screen.

This message keep flashing between Err2 and PACE on the screen.

I reprogrammed the card, but still same problem.

Please can some one help.

many thank
 

dave_c

VIP Member
VIP Member
Joined
Aug 18, 2005
Messages
2,537
Reaction score
145
Location
northamptonshire
Err2_ Simm error

the sim is prob not makin contact properly in the box try takin it out and refittin it again

Err4_ Flash Fail or can't find platform object
 

Spectre

Administrator
Staff member
Jnr Admin
Joined
Jun 3, 2001
Messages
41,104
Reaction score
5,420
Location
Airstrip One
Err2_ Simm error

the sim is prob not makin contact properly in the box try takin it out and refittin it again

Err4_ Flash Fail or can't find platform object

Unless there is an error in his original post, 4000s don't have a SIMM.

On the 4000, an Err4 is usually the NAND Flash.
 
TEST
Top